Search results

  1. M

    Mixing Rockers 1.7/1.6

    Has anyone heard of mixing up your roller rockers 1.6 with 1.7. You would put the 1.7 on the exhaust and the 1.6 on the intake. I heard this make more power then just running a complete set of 1.7 or 1.6.Any info on this would be great.The reason i'm asking is cause i'm going to buy some 1.7RR...
  2. M

    Intake Spacer

    OK.....................I want to put a intake spacer( between upper and lower intake) and was wondering what i would gain from this, is it worth it and who makes them and what thickiness do they come in. My mods are listed below and would it work good with my set up. myroc :D
  3. M

    1.6 to 1.7 RR

    Can i go from 1.6 to 1.7 roller rockers with out a problem with piston to valve clearance.I'm running a stock bottom end with Edelbrock RPM heads and intake. Will this work , has anyone tried this with this combo ?? CHEERS myroc
  4. M

    Valve Bodies

    I'm looking to buy a Lentech valve body ( for an 1990 AOD ) and was wondering if this is something that is easily installed or should i take it to a tranny shop. Myroc
  5. M

    Fuel pressure

    With these mods what should my fuel pressure be set at: :shrug: RPM heads and RPM intake 2040 crane cam 1.6 RR ARP head bolts BBK CAI 70mm TB and EGR and 73mm mass air 24 tube 24# injecters MSD dig 6 wires and cap March under pullies Double roller timing chain FMS roller lifters 190...
  6. M

    Speedo gear ????

    AOD,3:73 gears and 16" wheels, what speedo gear do i need to get my speedometer back to normal. myroc
  7. M

    Console shifters

    What aftermarket shifter (interior console shifter) will fit in the stock console with out hacking it up. Does B&M make one ??? myroc
  8. M

    Valve Covers

    I'm using a Edelbrock RPM intake and i was wondering what valve cover will fit under the over hanging pellium (spl??).Also using Edelbrock RPM heads if that helps.Looking for chrome valve covers.Picture would be great. myroc
  9. M

    Stall Convertors

    What are some of the best aftermarket stall convertors out there. I've heard alot of bad things about B&M convertors , so i will stay away from them.I,m looking brand names only. :shrug: myroc
  10. M

    Motor Mounts

    Whats a good motor mount to buy :shrug: ??? Should i just go buy a stock set of motor mounts or is there a good aftermarket mount out there. Cost is not a problem. Motor will have about 400 hp if that helps, and it a AOD. myroc :spot:
  11. M

    1/4 times with new mods ??

    I finally got all my mods and was wondering what you think my 1/4 mile times might be:The car is a 1990 7-up/limited edition vert. BBK equal lenght headers/ flowtech H pipe/flowmaster cat back. 3000 stall/trango shift kit/3:73 gears. Subframe connecters full lenght. 190lb Holley forced fuel...
  12. M

    Cam Question

    Is the Crane PowerMax 2040 Camshaft the same as the E303 Camshaft.If not is the Crane 2040 a noticable sounding cam. myroc
  13. M

    Oh No

    I have been reading lots of bad stuff about the C&L MAF and i was wondering if it will work with this combo. Oh no............. i just bought a prof products 70mm TB 70mmEGR and a 73mm C&L MAF 19lb and a typhoon intake .Edelbrock heads 190 intake and a e303 cam will also be add and put on at the...
  14. M

    AOD Shifters

    What is a good aftermarket shift for an auto, Don't really want to butcher up the stock console. Want somethig that will just bolt rite in. Some pictures would be great to give me an idea how they look. myroc
  15. M

    Help Vert owners

    What do you use to clean your top?? mine is white. Do you need some special products or can you use some house hold products.I have a few black marks that don't come out with a regular wash myroc
  16. M

    Heads

    Heads and other stuff Buying used heads is this a good idea, if so what should i look for. Is there a life span for alum heads.And what heads would work good with the P.P typhoon intake manifold 70mm TB, 70 EGR and a mass air 19lbs(think thats what its called) Could i put the intake on by...
  17. M

    EFI intake manifolds

    I,m looking for an intake manifold and was wondering witch is better: Trickflow Heat Edelbrock RPM. So far this is what done to my motor: BBK equal lenght headers Flowtech H-pipe Flow master 2 chamber cat back Mach under pulleys MSD blaster coil MSD wires ZEX nitrous system 100 shot...
Top Bottom
Back
Forums
Menu