1967 mustang

Hey, 16 years old and working on a 1967 Mustang. Has a 351 Cleveland 4 carb. Was driving around and began hearing a loud thumping sound from the rear driver side that speeds up and slows with the wheel rotations. Went back and checked to see if there was a rock or something lodged in a brake...

I'm looking for the measurements for the inner aprons that weld to the firewall! I need the distance between the aprons on the inside,and the distance from the edge of the firewall to the outside of the apron for both sides! And the distance from the frame to the top of the aprons! Please help...

Hello, I work for a local garage in my area and am having some issues. A customer brought us a 1967 Mustang coupe with a T5 and a 303 from a foxbody. I put a clutch, pressure plate and flywheel in to match with the T5/302 combo. The car was kept with the original clutch linkages from the 67. He...

I have a 1967 Mustang that is a 3-speed and has had a 351 Windsor motor put in instead of the 289 it came with originally. When I drive it and reach third gear the engine feels like it wants 1 more gear to reach a comfortable place. This being said, I want to put in a 4-speed transmission. my...

Hey! I’m new to this forum and new to owning a classic car. Me and my father own a base model 1967 Ford Mustang with the 200ci inline-6. It has low miles (close to 20k by now) and we want to help the engine with its hesitation. It has slow acceleration, so we want to wake it up a little bit so...

Hi guys so i purchased a 87 302 roller motor and was looking to get it rebuilt. I am not sure on the came to use? Stuck between the E303 Ford Performance cam and the 35-440-8 Comp Cam. Is anyone running these? If so what upgrades do I have to look into? As of right now plan on keeping the...

Hello! I own a 67 289 Mustang and I've been having some pretty major cooling issues. About a month ago I was washing my car and I noticed the battery sounded low on startup. So I was letting it run to see if I could charge up the battery and after about 10ish minutes my radiator proceeded to...

Hi guys, so I put an 8.8 rear end in my 1967 mustang and I was wondering what size wheel and tire would fit. I was looking at 15x7s and 15x8s. Most come with 3.875 backspacing and 4.5 backspacing, however I do not know which will fit. Any help would be appreciated, thank you

Hello, I have a problem with a 1967 coupe , and I would like some possible solutions. I've been restoring it with my grandfather for three years now. What the problem is, is that after 25-30 minutes of running completely fine, the engine seems to suddenly almost die but not quite. It'll run...

I recently went to start up my 1967 mustang coupe after about three months of sitting in the garage, but when I turned the key nothing happened, there was absolutely no noise. I hooked up the charger assuming the battery was dead and the charger immediately Indicated that it had a full charge...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Starsky and Hutch movie car races The stunt car from the movie Taxi. This is an interesting match up and one that was fun to do! These are just two of the cars that are in Chris "the Doc"...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang There are many reasons why the door to your classic Mustang convertible many not close straight. In my video I will cover them. That way you will know what to do, or fix and enjoy a smooth closing...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Does your classic Ford Mustang have sloppy shifting movement? Does it move more side to side than up and back? Watch my video and I'll show you what the problem probably is. With a little time you...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Use this little trick to greatly improve the spark of your classic Ford Mustang voltage regulator. Improved spark means a cleaner start and better fuel efficiency; and isn't that what we all want...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Why are Classic Mustang Carpets so Short? You would think that this would be an error in production, but its not! Thats the way that they were laid out. Watch and find out why. Mustang...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang It seems like a really basic thing, but many people dont really know how bad not changing oil can affect your engine. Watch this video while Chris "the Doc" Ingrassia shows you first hand what...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang If Scott Drake put out a product I didn't like, believe me, I would say it.. But so far they have been batting 100%. These Stainless Steel headers are constructed so well I was hard pressed to...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang Cal Pony Parts has been creating these late model Mustang engine dress up kits for years, but now this product is one that really looks good. And, it goes on easily. Watch my video and see how...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang http://www.OperationMustang.com - 30 Min Bi Weekly Classic Car Web Show. All Shows Archived on the site! http://www.ClassicMustangTelevision.com - 100s of Free How-To Videos. How to Fix Broken...

Please LIKE my Facebook, if my videos are useful to you: http://www.facebook.com/OperationMustang How to Jack Up your Classic Car the Right way