1995

My wipers won't turn off I heard it might be a bad motor I wanted to know if I could just pull out the relay as a temporary solution but I can't even seem to find any relay on a diagram my question is it safe to disconnect the wipers and where would the relay be and how do I disconnect the...

I have a 1995 GT but had to stop driving because no matter what gear I tried to put it in it was drive. So it sat for awhile and when he went to move it he shifted into all the gears but slightly sluggish, after checking the tranny fluid we realized it was pretty dark so we got a new filter and...

I have a pair of refurbished 1994-95 Ford Mustang spindle and hub assemblies(Left & Right). They start as a OEM FORD spindle core and they have been completely diassembled, cleaned, examined for wear and breakage, sand blasted, and powder coated in black. Then brand new OEM quality hubs are...

How’s it going mustang fam ? I was wondering which cylinder heads will fit best on my ‘95 5.0 automatic. i was thinking aluminum heads but which ones? I’m not trying to race my car but I want to add some more power. when I do order the heads I end up choosing, do I just bolt back on ? I been...

No idea what it is.... on a 95 GT...

Been working on this issue for months maybe even years now, it’s the same thing every test drive, it runs perfectly except for size varying hiccups and/or hesitations up at around 2k rpm, the code we’ve been receiving all this time has been code 212: loss of IDM (ignition diagnostic monitor)...

Does anyone have the Pinouts for the Microsquirt to 94-95 SN95 EEC Harness? It would greatly help me figure out how they are interfacing and working with/around the CCRM. (Specifically the AC WOT Cut and AC Control Circuit)

So I've had my car since I was 14 (it's coming up on 5 years later) it's a 1995 5.0 anyways before I knew anything about the mechanics of cars I had a guy that worked on my car for me (a few other people too) but they have all told me I have a 5.0 cobra not just the normal 5.0 GT I was curious...

Anyone running an electronic fuel pressure sensor with your megasquirt. I'm looking to add on on my 95. What is your setup?

Alright here is is. I now have an EFI Source 86-93 MS3 Gold Box with the Microsquirt to run the AODE. Build Details: 1995 Mustang AODE GT40p Heads Anderson B-31 Cam 218/228 109ICL 112LSA Explorer Intake 65mm TB, SN95 MAF, Stock Airbox, K&N Filter BBK Shorties VRS Catted X Ford BB302 30lb...

I have a 95 Mustang Convertible it is not a 5.0 I was running the AC yesterday but it was hot enough in Nevada that I pulled over to take the top down (the AC and car were both still running), I took off from there and not even five minutes latter I heard a rattling in front when I pushed on the...

Hey guys I've got a serious ignition issue and at this point im just looking for other opinions 1995 Mustang GT 5.0 Bored and Stroked to 347, 5 Speed, Convertible California Car. So this car has been an ongoing project, did the engine and have been having serious ignition gremlins since...

Hi. I'm new to this forum. I have a problem with my car after numerous attempts to fix the issue to no avail. My 95 Mustang GT has had this ongoing issue for a long time. Pedal has this sort of vibrating feel when pressed cruise or load. Car bogs and sounds loud and not going anywhere past...

Tried search and nothing. there's 3 yellow wires and a red. The yellow's may have a stripe color code, i'll have to get a better look. Thanks.

hey guys, so at the moment I have the factory 302 with 80,000 miles on the mustang. love the car but its to slow. So after this deployment I want to throw a a stroked 351w to 408 CID. looking for someone who's done the same thing as me and what they recommend. heres what I want: 1. Keeping the...

hey guys been a while. so ill start from the beginning. a few months ago I got beat by an SRT4 while i was in my 1994 ford mustang gt. I know. since then I came to the realization that I need a faster motor not car. ive been running back and fourth on ideas still haven't picked a route yet...

Hello. Can somebody give me information about the operating temperature on a 1995 5.0? I replaced the engine; the new engine has approx 20K on it. But, before the engine, I was still experiencing temperature changes on the temp gauge (factory at first, then aftermarket) that did not happen in...

Hello. Am I able to swap out my blown 1997' 3.8l engine (with high miles), with the motor of 1995' 3.8l? And if so, then what exactly needs to be done with my 1997's original computer so that it recognizes and is compatible with a 1995 engine? I appreciate any attention given to my question...

just wondering what some of you guys that have swapped the H/C/I what you swapped it for and what you got for specs on the dyno and rpm range

ive been looking around trying to find a decent cam with i good sound but not too aggressive and also gives me good performance. i have the 94 gt and was seeing a lot of people getting the E303 cam vs something from trick flow or comp cams. first id like to know why, secondly id like to know if...