swap

hey i have a 2005 mustang gt i saw that the 2009 has the factory ambient lighting in the cupholders and the button, is there anyway too find those parts anymore for a upper center console swap? i looked parts says discontinued and ebay is dead.

Researching these forums has been really helpful for me, so I'll leave some details of my trans swap to maybe help others down the road. Car 2001 GT Auto - 1st owner, 60k miles. I bought most of the following parts 10 years ago, and then took a break from modding the car while my kids were...

I somewhat recently purchased a cobra upper and lower and will soon get around to installing them. As my car is a daily driver I am trying to sort out any issues beforehand. I know this is a common swap so I'm sure some of the information I'm asking for is out there I'd just like to be certain...

So I had a wrecked 1994 that I pulled 99% of all usable parts off of, and a 1988 I had bought a while back. I'm hooking up a 1994 engine harness to the body, but I'm stuck on a few connectors and at this point I'm thinking I'll have to cut/wire/repin parts of the harness. The problem is, I can't...

I have a 4cyl 1990 car and I just bought a 98 explorer with a 5.0 and automatic. how can i get the ecu and harness from the explorer to work? the mustang will have a manual in it so how will i get the ecu from the automatic explorer to work with a t5?

hey guys I'm building a 5.0 for my 89 and I've decided to go with a holly sniper fuel injection set up rather than the efi set up... just wondering if anyway has done this do I have to change the distributor? any advice along the way would be appriciated thanks in advance scotty

So I purchased a v6 with corbeau seats and a full eibach suspension, I was thinking of swapping a lq4 6.0 swap. Would anyone be able to possibly help me in what I’ll need to complete the build?

Hi Everybody, I'm new to the forum, but have been lurking for years, since I got my 67 falcon. I'm building a Roller 302 to go in it and have some issues that I need help with. I bought a 74 302 from a f150 for the accessories and have a 2000 Mountaineer Roller block with aluminum heads, cam...

I just picked up a 1993 LX Coupe with a Gen 1 Sealed Coyote Swap. (NMRA style). The previous owner left what I assume is the stock manual control pack tune on, as he said he never had an X4 or NGauge. The car has Kooks 1 3/4 headers, JLT cold air, the SVE Coyote Swap fuel kit (Aeromotive 340lph...

so i have an 88 fox, and I've swapped a 1996 drive train (2V, 5 speed rear end, suspension and brakes) and of course the electrical system from the 1996 GT is now in the FOX. I'm trying to now hook up the DLC so i have obd2 to tune the car, and I'm lost. Does anyone have any wire diagrams or...

Yay First post!! New to the forums! Ok guys I have a 2003 v6 base model. Am currently in the process of an interior swap from the gray and black to all black. Does every model come stock with the vanity mirror light plug or would I have to do some slicing to make it work? If the latter what...

Let's begin, this is only my second thread to start on here, besides my into, and I'll mainly be adding progress of my 1989 Mustang that I am currently daily driving beside my 1990 bronco. I have quite a few project vehicles, so I figured posting about at least one of them would be worth while...

Hi, I am new to the forum and recently did a 347 swap into my '91 fox, and when doing so, I replaced the ECU with a Holley Hp EFI system. I have the car running and driving, but the radio does not turn on. I believe the radio got its power from the old ECU through its system of big red wires...

Okay so I have a 96 GT 5 speed that ive had for almost 2 years. Well being from PA the torque boxes rotted out and the car almost broke in half. I bought a 95 v6 auto from texas and am in the process of swapping EVERYTHING. I already have both of them stripped down and am currently prepping for...

2nd Annual All Fast Fords and Muscle Mustangs Swap Meet being held at Sacramento Raceway as part of the all day Fast Fords and Muscle Mustangs event. Limited swap spaces. Spaces approximately 15' x15'. $15 for reserved spaces. $25 for unassigned (day of event). Vendors and attendees must also...

I have the majority of the wiring done (I think) I used a duraspark ignition module. Have a ignition harness with it too. Got everything hooked up (coil, dizzy, module) and there's a few extra wires that don't go to any connectors. One of them is pink coming from the igntion coil positive...

Okay so this is my first post to the forum and I’m not quite sure how to go about my situation. I’m in the middle of swapping a 2003 or 2004 IRS in my 1991 hatch back. The car was a father/son project and my dad has recently passed so I’m kinda stuck. From what I know and have been told by my...

Ok, so here it goes. I put a 4.6 modular v8 together and put it in a 2002 ford mustang GT Jack Roush stage 2 five speed manual. It will not start... I have checked the voltage on the throttle position sensor. .986 when closed then 4.66 at WOT. It has a new fuel pump, a new MAF, it has a new Fuel...

so I have a 2001 bullitt and I’m tired of the 2v so I’m looking to terminator swap it but I can’t seem to find a new terminator engine. Can someone point me in the direction on finding one please and thanks!

In the process of swapping my 4 banger coupe. Actually got the motor in last week, will my 2.3L aod transmission work on the 5.0?