wiring

I have the majority of the wiring done (I think) I used a duraspark ignition module. Have a ignition harness with it too. Got everything hooked up (coil, dizzy, module) and there's a few extra wires that don't go to any connectors. One of them is pink coming from the igntion coil positive...

I have everything wired up (starter, alternator, ignition). But coming off the positive side ignition coil terminal is a pink wire. Where does this connect to? There also a white, red, and yellow wire that aren't going to anything but coming from the igntion module. Any help?

Hey guys new here so bare with me.. I have a 86 roller 4 cyl 5 speed car.. I have an 88 donor car 5 speed 5.0 with maf conversion that I will be putting in my 86.. am i going to run into any issues with the 88 wiring harness going on to an 86 car.. and will I need to anything else from the 88...

I have the whole duraspark ignition module and wiring. I have the 3 wires that run from the dizzy to ignition harness but do I need a wire that runs from the center of the distributor rotor to the top of the ignition blaster style coil? If I do need it where do I get one? Cant seem to find one...

I've looked everywhere and can't find the stupid diagram or info anywhere! I just want to know the 3 wire color code to my 2010 Mustang GT Premium's headlights. High/Low/Ground... Not sure which goes to what color... My wires are yellow with a purple stripe, black with a white stripe, and brown...

A little background. I've had a 85GT for 8 or 9 years and it had a 3g alternator upgrade when I got it. I've converted it to Holley Commander 950. I am in the process of replacing the C950 with the HP ECU and want to redo all of my wiring I used to install it originally. I am also wanting to...

I bought this car a few months ago. Turbo car built. Who ever did the wiring obviously messed something up. I had a no start issue where the theft light was flashing. Initially I thought it was a pats issue or a bad key. Had a locksmith come out and he confirmed that was not the issue. Well last...

I bought a 95 gts to fix up and is currently a mess. The fan works when connected directly to the battery but I don't think it's turning on when it gets up to temp. On the dash the temp gauge looks higher then it is and rev gauge doesn't work at all. The guy I bought the car from was trying to...

Does anyone have any kind of wiring diagram for a 302 carb motor with a mechanical fuel pump? I started from scratch buying and shortblock for my 1993 4 cylinder coupe. Have the motor complete and in, doing fuel lines Saturday. Was wondering how to wire it all? I have the ignition module, coil...

So I have an 88 GT that is going to be a track only car and I want to strip the wiring "back to basics" essentially. What I really want to know is what I need to keep on my harness for the car to run and drive and do all that good stuff. I want to do a switch panel ignition and I am probably...

When I first start the car, its good and gets going fine. I drive it for about a minute, whether it's cold or warm already, and then it starts shuddering and jerking and losing power, like it's going to stall. If I gas it, it hesitates and eventually pulls itself out of it. It does this for...

Hey what's up guys, Im new to the forum here. So here's my dilemma. I have a 1986 GT 5.0 That keeps shutting off. You start the car up, it runs fine, sometimes for a few minutes, sometimes for a few seconds. Sometimes it will shut off on its own, sometimes it will happen if you press the...

2000 mustang 3.8L V6. fuse#21(ECM and cluster) blows right away with key in or out. I must have a short... so.... where or how do I start looking for it? any help!!!!

So i have a 88 GT and i have a cluster wiring issue. When i turn on the brights my temp gauge jumps up, my battery gauge goes down, my RMP gauge goes up and also the speedo. Also all of the lights shut off on the cluster. When i turn on the left blinker the arrow shows up but when i turn on the...

Hello Everyone, I have recently installed fog lights on my 65 mustang non-GT coupe. I've been having trouble with the fog lights blinking after a few minutes of them being on and the engine running. When they blink, there is a very clear "click" from the circuit breaker which makes me...

So I'm attempting to rewire my '73 mach 1. I searched high and low for a full kit for this specific model and was unable to find one so I ended up going with a basic universal kit. the problem is the American Autowire Highway 15 kit I purchased come with a dash mounted ignition, when the car has...

Hello everyone I just got a old 1995 mustang with a 3.8 now I am trying to fix all the problems it has and I am just stumped on this one In the drivers door there's no power to the window switches the door locks work and the passenger side door switch works the window fine but theres no power to...

So it started when I plugged a usb charger into my aftermarket deck in my car... I heard a weird whirring noise accompanied by a loss of my back light illumination and audio output to my deck. Basically rendering it useless. I tore into it and checked the deck directly with the battery & it...

Hey guys I'm new to the fourm, I've got a 1990 GT with a very healthy 302 that I am trying to build into a drag car that will still be a "street car". The previous owner spliced into every word you can think of and it's really quite sketchy. So I would like to gut the factory wiring and start...

I just put a new engine in my car (03) my car is a 2002. The radio was working right before we pulled the engine as I was messing around with it before. I'm thinking it's a ground but I don't know where to check. All fuses are good, none are blown. Apparently the radio and wiper blades are...