• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

14.9@94.08mph. WTF!!! I hate my life.

  • Thread starter Thread starter SuperDust22
  • Start date Start date Jul 31, 2004
Status
Not open for further replies.
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3

Nik_95Cobra

Founding Member
Feb 5, 2002
1,677
1
37
Tempe, Arizona
Aug 2, 2004
#41
  • Aug 2, 2004
  • #41
I heard him spin like a mofo on one of the runs...Sounded like a lot of wheel hop. That was you wasn't it Dustin?
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Aug 2, 2004
#42
  • Aug 2, 2004
  • #42
If he's spinning off the line... than he doesn't need a stall. He needs traction and that should be a common sense thing. Through all of this post, I've never read anyone suggest he had TOO much power as the reason he would slow down.

Guess for those of us that are not familiar with his car, we need more information like a timeslip in DETAIL from before the swap and a DETAILED one from the night in question.

If everything is BETTER but the 60ft... then your answer is either traction problems or bogging. If it's there is a difference in the middle of the track, then his tranny is probably on the way out or not setup right. See my point? Information is the key....

BTW - are you manually shifting? If so what rpm???
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Aug 2, 2004
#43
  • Aug 2, 2004
  • #43
Yeah Dustin if you still have stock control arms you may want to upgrade. My bushings in my stock ones were shot at 110K and were in bad shape.
And get a pair of Drag Radials.
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
Aug 2, 2004
#44
  • Aug 2, 2004
  • #44
gcomfx.com said:
I don't get it... you were hitting 2.3 - 2.4 60ft and you don't know how bad you were spinning? But then you agree about the stall speed information that Killercanary was talking about. What KillerCanary was saying was it would stall LESS.... meaning you most likely weren't spinning at all. Don't assume that street tires + mustang = wheel spin. ESPECIALLY in an AODE.

When I switched to my Cobra Intake, I didn't gain in the 1/4 mile ET either. But I did trap more as you say you did. The reason.... as stated by others in here, we've moved our power curve UP... which makes our cars bog out of the hole and basically kills our low end grunt to get us moving. I would be willing to bet you didn't spin one bit. My car doesn't.

Tell me how you are launching.... I'll tell you what I do differently and what works for my AODE.... try if you like, maybe it'll help you as well. Either way... WATCH YOUR SPEEDO WHEN LAUNCHING....and watch your tach!!! That will tell you if you are spinning or not and you will have the keys to the city when you figure that out.

BTW - I recently bought a bigger stall as recomended by my tranny guy. Now I'm on my 3rd one! The first one sent we assume was a truck stall. It stalled at 1k rpm. I gained a half second at the track... back to a 15.3 with a 2.4 60ft. NO SPINNING.

The owner custom built a stall for me and dyno tested it personally. Guess UPS dropped the damn thing cause it worked for 60s and 10-15 feet before the stator started shreading inside. Shinny glitter in the fluid. It did stall nice though! So I have hope....

I'm suppose to get the 3rd replacement this week and a refund of $125 for the trouble and tranny fluid I've wasted. My club has the local track on the 22nd and I hope to test it out that night along with some stickies.... if this one is bad, I'll race on the stock stall. My car should hit a 14.5 and a 12.9 or faster.

Explain your launches in detail and I'll reply if you want.
Click to expand...

I figured that I would lose low end with the intake but I thought I would make up for it in the long run. I though I was spinning and when I asked people they all told me I was. They could even hear me wheel hop real bad on one run. And they weren't even close to me. The first run I bought the rpms to 1500ish then just stopped on it when green, I ran a 14.9 that run. The second one I launch as hard as that AODE could. That's when I got the wheel. I didn't look at the tach on that one. I when at high as I could before the tires would start to spin. Third run I launch at idle. And so did I on the last. Each time got worst and worst. I tried almost everything.
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Aug 2, 2004
#45
  • Aug 2, 2004
  • #45
But you never looked at your speedo to see how bad you were spinning or for how long? Can you post a full timeslip? We can compare slips to see where all your time was lost. No offense to your friends, but mine say I spin like a ******, but I know better as I keep a close eye on the speedo and the rpms. Unless you see a spike that you need to hold it back from shifting... my AODE really needs that spin to launch well.

I've never had a problem launching my car. Spinning is not an issue, but I always run good tires.

From the looks of your burnout video, it really looks like your car wants to hook up. That's one of the reasons I figured your car would behave similar to mine.

For me to get my best times on the stock stall and nice street tires. I have to hit it from a dead idle and get the tires to spin for about 2 feet. Anything less than that and it bogs out of the whole a bit losing a few tenths. I really hope that this stall, if I ever get a good one, will actually cause traction issues on street tires. Since Im running bone stock suspension, I've only got room to improve on that.
 

yellow5.0cobra

Founding Member
Jul 25, 2002
2,849
0
0
In the garage, On the floor.
Aug 2, 2004
#46
  • Aug 2, 2004
  • #46
it doesnt matter if u spun half way down the track and caught traction, you would still have a higher MPH at the finish line.
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
Aug 3, 2004
#47
  • Aug 3, 2004
  • #47
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Aug 3, 2004
#48
  • Aug 3, 2004
  • #48
I can't quite make out what your 330ft is on your old slip, but you are definately picking your time up on the big end.

To me it looks like you are blowing the tires on the line. And either not getting out of it, or getting out of it too much and bogging. It all seems to be in the first half of the track.

I would love to see a video of your launch or see it in person. It's so strange to me that our cars could be that different. There aren't many AODE 94-95s where I live. Some guys think my car hooks because the timing is set so low that it's not making much power. But I can hit the juice from 2 feet off the line without much problems at all.

Another question: Are you manual shifting to get the extra out of your intake? I push mine an extra 400rpm above where it shifts on it's own to get another tenth or two out of a run.

Here's one of my similar timeslips. Someone jump in here and do a comparison.
 

Attachments

  • 14_95.gif
    14.8 KB · Views: 128
6

67cougerrr

Banned
Oct 4, 2005
20
0
0
May 21, 2006
#49
  • May 21, 2006
  • #49
maybe you just dont know how to drive a car practice on gran tourismo for a bit and maybe you might be able to beat those pesky "stock v6 cameros" dummy
 
P

Pennywise2

Banned
May 16, 2006
1,379
1
0
May 21, 2006
#50
  • May 21, 2006
  • #50
67cougerrr said:
maybe you just dont know how to drive a car practice on gran tourismo for a bit and maybe you might be able to beat those pesky "stock v6 cameros" dummy
Click to expand...
Did you come up with that one yourself?
 

Guero

Active Member
Oct 11, 2005
2,148
0
47
May 21, 2006
#51
  • May 21, 2006
  • #51
dam ive ran the stang at least 20 times at the track, and only ran 15's twice. all have been, from 14.96 down to 14. flat, the 14.96 being just catback and cai. something is wrong.
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
May 21, 2006
#52
  • May 21, 2006
  • #52
Guero said:
dam ive ran the stang at least 20 times at the track, and only ran 15's twice. all have been, from 14.96 down to 14. flat, the 14.96 being just catback and cai. something is wrong.
Click to expand...

You also have a five speed which makes a huge diff. I also got the old green car down to a 14.5 with better weather. You must remenber I live in AZ, it can still be a 100 at night.

Dustin
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
May 21, 2006
#53
  • May 21, 2006
  • #53
67cougerrr said:
maybe you just dont know how to drive a car practice on gran tourismo for a bit and maybe you might be able to beat those pesky "stock v6 cameros" dummy
Click to expand...

Damn you are a loser to pull up a thread that is almost two years old. Who the hell would want to search for it. I don't even have that car anymore. Get a life. Loser. Later troll.

Dustin
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
May 21, 2006
#54
  • May 21, 2006
  • #54
He's banned, but please do not tryand bypass the language filters.
 
Prev
  • 1
  • 2
  • 3
First Prev 3 of 3
Status
Not open for further replies.

Similar threads

Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
301
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
534
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?