Car was a 5.0 manual car originally and was converted to auto(4r70w) All mods were made about 18 months ago and car has gone 1500 miles since then. Title in hand, car can be plated
Car was plated and was built to drive to the track, 60ft like a trailer car and drive home. Put a lot of time and money in the car but I'm moving in a week and can't deal with moving the roller. Taking the 4r70w and Dart block out and selling it as she sits. All suspension, brakes, rear axle etc in perfect condition. Body has seen better days, it looks good in pictures but has a lot of small door ding dents and small scratches. I would give it an honest 6 due to zero rust. Well over 6k in parts alone not to mention it can be plated, clean title in hand. So many rollers out there with sketchy past and no title. If your looking for a roller to make in to a quick street car that hooks on the track and street this is what she does.
Asking $4700.00 OBO
No low ball offers, may consider removing some items to lower the price. IE Florida 5.0 Dash, Seats etc
Wolfe Craft 6 point cage with swing out doors
Cervini's 2.5 inch cowl hood (non hood pin) uses metal shanks and uses factor latch
Subframe connectors
Rear Upper Control arm reinforcements bolted and welded in
Flordia 5.0 Dash
Team Z strip series 1 rear suspension with antiroll bar
Strange 10 way rear shocks
Team Z metal matrix k-member
Team Z front coilover conversion
Team Z A Arms
Strange 10 way struts
Flaming River manual Rack
Flaming River adjustable steering linkage
J&M Caster Camber plates
Aluminum Radiator with built in trans cooler
Aux Trans cooler
Dual Electric Fans
8.8 with eaton posi
Richmand 4.10's
31 spline axels (4 lug) with ARP long studs
11 gal baffled fuel cell
Steel braided brake lines
Corbeau Seats
Weld draglites 15x8 / 15x4 front tires like new. Rear tires need replaced
New Carpet
Restored inner door panels
Working power windows, wipers etc
lots of extra trip piece to complete interior
New parts not on car New in boxes that come with the car
1 piece late model Resto head lights
Smooth inner fenders
Drive shaft loop
Painless wiring harness
I'm sure I'm forgetting a few things but that's bulk of it.
Located in Swansboro NC 28584
Jake 910-915-9841
Car was plated and was built to drive to the track, 60ft like a trailer car and drive home. Put a lot of time and money in the car but I'm moving in a week and can't deal with moving the roller. Taking the 4r70w and Dart block out and selling it as she sits. All suspension, brakes, rear axle etc in perfect condition. Body has seen better days, it looks good in pictures but has a lot of small door ding dents and small scratches. I would give it an honest 6 due to zero rust. Well over 6k in parts alone not to mention it can be plated, clean title in hand. So many rollers out there with sketchy past and no title. If your looking for a roller to make in to a quick street car that hooks on the track and street this is what she does.
Asking $4700.00 OBO
No low ball offers, may consider removing some items to lower the price. IE Florida 5.0 Dash, Seats etc
Wolfe Craft 6 point cage with swing out doors
Cervini's 2.5 inch cowl hood (non hood pin) uses metal shanks and uses factor latch
Subframe connectors
Rear Upper Control arm reinforcements bolted and welded in
Flordia 5.0 Dash
Team Z strip series 1 rear suspension with antiroll bar
Strange 10 way rear shocks
Team Z metal matrix k-member
Team Z front coilover conversion
Team Z A Arms
Strange 10 way struts
Flaming River manual Rack
Flaming River adjustable steering linkage
J&M Caster Camber plates
Aluminum Radiator with built in trans cooler
Aux Trans cooler
Dual Electric Fans
8.8 with eaton posi
Richmand 4.10's
31 spline axels (4 lug) with ARP long studs
11 gal baffled fuel cell
Steel braided brake lines
Corbeau Seats
Weld draglites 15x8 / 15x4 front tires like new. Rear tires need replaced
New Carpet
Restored inner door panels
Working power windows, wipers etc
lots of extra trip piece to complete interior
New parts not on car New in boxes that come with the car
1 piece late model Resto head lights
Smooth inner fenders
Drive shaft loop
Painless wiring harness
I'm sure I'm forgetting a few things but that's bulk of it.
Located in Swansboro NC 28584
Jake 910-915-9841