• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

24 lb injectors??

  • Thread starter Thread starter GaryB
  • Start date Start date Aug 25, 2007
G

GaryB

New Member
Apr 4, 2006
24
0
0
Flordia
Aug 25, 2007
#1
  • Aug 25, 2007
  • #1
Well I want to upgrade to 24lb injectors and calibrated maf. What do I need to look for when buying these parts, I read about red top blue top etc. What is the diff. I want to do a plug and play not alot of other mods such as harness or fuel rail modification. Anyone got any pointers? The car is a 93 5.0 5speed coupe.
Gary B.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 25, 2007
#2
  • Aug 25, 2007
  • #2
larger injectors and MAF are plug and play, assuming you select the right parts...

The harness and fuel rails won't need to be touched.

contact PMAS or ProM or whatever the new company name is this week...
They will have the right meter for you.



Another option for running 24's is to switch to the 93 Cobra ecu, MAF, and injectors.
This option is more expensive, but will not result in ANY drivability issues, as cal'd MAF meters sometimes will.


jason
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Aug 25, 2007
#3
  • Aug 25, 2007
  • #3
blue top is 24#, red i believe is 30#
 
G

GaryB

New Member
Apr 4, 2006
24
0
0
Flordia
Aug 25, 2007
#4
  • Aug 25, 2007
  • #4
I tried to purchase cobra ecu with injectors on this site classified section but can't get replies from the seller. next option is used and or rebuilt injectors and a matching maf possibly not from the same seller. any brands to stay away from??
Wish I could contact the seller of the cobra stuff!! been trying for a while.
 

Flo331

New Member
Mar 13, 2007
10
0
0
Orlando, FL.
Aug 25, 2007
#5
  • Aug 25, 2007
  • #5
When buying injectors please never buy used you can get burned on this.....just to put your car back together to find out one of your injectors is fouled out. Also I would not use 24's due to there spray pattern I just don't like how there spray pattern is...if I were you just get 30lbs they are not that big of a step-up and still very very street-able and will also get the job done and you can have room to grow. And yes, you HAVE to get a matching mass air meter calibrated for you injector size. For this PMAS (used to be called ProM) is a very good company to work with.
 
L

lvboost

New Member
Feb 19, 2007
32
0
0
mass
Aug 29, 2007
#6
  • Aug 29, 2007
  • #6
when buying the injecters make sure that they are ford motorsport injecters because the bosh injecters have a diffrent spray pattern.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Aug 31, 2007
#7
  • Aug 31, 2007
  • #7
lvboost said:
when buying the injecters make sure that they are ford motorsport injecters because the bosh injecters have a diffrent spray pattern.
Click to expand...

I don't know the difference but what's wrong with bosch's spray pattern? what is the difference?
 
L

lvboost

New Member
Feb 19, 2007
32
0
0
mass
Sep 2, 2007
#8
  • Sep 2, 2007
  • #8
the ford injecters have a diffrent spray pattern that other injecters cant flow because ford has the patent
 

Tubo(2-bo)

Member
Mar 25, 2004
279
0
16
Ft Walton Beach FL.
Sep 9, 2007
#9
  • Sep 9, 2007
  • #9
vristang said:
larger injectors and MAF are plug and play, assuming you select the right parts...

Another option for running 24's is to switch to the 93 Cobra ecu, MAF, and injectors.
This option is more expensive, but will not result in ANY drivability issues, as cal'd MAF meters sometimes will.

jason
Click to expand...

The Cobra ecu has lookup tables for 24lb injectors using, the 19lb calibrated 70 mm. Cobra MAF. Same MAF module as stock HO. If you go to larger injectors, the Cobra ecu is no longer using valid lookup tables.
 

65ShelbyClone

Founding Member
Sep 9, 2000
4,675
38
119
Antelope Valley, SoCal
Oct 16, 2007
#10
  • Oct 16, 2007
  • #10
Black1987Stang said:
I don't know the difference but what's wrong with bosch's spray pattern? what is the difference?
Click to expand...

I also want to know why the Boschs have a "bad" spray pattern compared to the FMSs which ironically are a Bosch design.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Oct 16, 2007
#11
  • Oct 16, 2007
  • #11
Tubo(2-bo) said:
The Cobra ecu has lookup tables for 24lb injectors using, the 19lb calibrated 70 mm. Cobra MAF. Same MAF module as stock HO. If you go to larger injectors, the Cobra ecu is no longer using valid lookup tables.
Click to expand...
The bold comments are flat out wrong
The HO and X3Z have different MAS sensors. The part numbers are different.

I am not sure what you are getting at with the italic comments...
Maybe you can elaborate by mentioning ALL the parts you are discussing?





The only injector difference I am aware of has to do with the pintle and cap.
Some Ford injectors don't have a pintle cap.
Some Ford injectors have a 1-hole pintle cap.
Some Ford injectors have a 4-hole pintle cap.

Obviously the pintle cap design (or lack thereof) will affect spray patterns...


jason
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Oct 19, 2007
#12
  • Oct 19, 2007
  • #12
Ford injectors are a bosch design....i used to work for Bosch as an injector engineer.
 

Repostyle

Member
Jun 11, 2005
538
0
16
Portland, OR
Dec 1, 2007
#13
  • Dec 1, 2007
  • #13
I hear a lot of people saying stay away from C&L MAS's, but I can't agree with that as I have had no complaints about mine.

I also can't elaborate on why people should not use C&L because the one's saying stay away are not saying why.
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Dec 17, 2007
#14
  • Dec 17, 2007
  • #14
Repostyle said:
I hear a lot of people saying stay away from C&L MAS's, but I can't agree with that as I have had no complaints about mine.

I also can't elaborate on why people should not use C&L because the one's saying stay away are not saying why.
Click to expand...

I used to be one of the most passionate peeps who would say

"C&L meters are a POS and don't waste your money on one" :Word:

The main phrase in that statement is ... used to say

Allow me to give a perspective as one who has been in the self tuning thing since
it was just getting started and nobody really knew much about doing it

My reason for wanting to give you the brief history lesson is ....

So you can see how many peeps came to feel that way in the past
and
So you can see how info in the past that was once true and valid
sometimes
Can no longer be all that accurate
or only ... partially true

Years ago ... many thought tuning was ...
twisting the dizzy and upping the fuel pressure

You can only do that for so long until you need a new meter to deal with the
additional fuel needs (bigger inj's) mods such as h/c/i and the like produce.

The whole deal of buying a meter that is calibrated for a certain size inj
which was invented by the aftermarket meter manufactures can have its
share of undesirable issues ... but back then ... not many were doing what
we call ... tuning ... which these days we know is a self tuning interface
or having a Pro burn a chip.

ProM and C&L were mostly the only game in town back then
and
It was no secret

Peeps just had better luck with the ProM meters :Word:

Now ... so much for making an aftermarket meter work without a tune

Lets bring in the newly formed self tuning community
and
Lets see how they found differences between the two meters

First of all ... a ProM meter would be delivered with a sheet showing the test
results of how the meter preformed

The C&L had no test results provided
and
If you called C&L ... you got a rude reply of ... "Why would you want that?"

This data was ... and still to this day ... is a good thing to have when you are
starting to dial in your maf transfer curve that is gonna be a custom kinda thing
for your particular combo if you are a self tuner type of guy.

Are you starting to see how ... the C&L meter was quickly loosing credibility

Back then ... The old ProM metal case 77mm meter was very accurate
and
You rarely saw peeps on the boards say anything bad about them

What you saw over and over was peeps saying ...

"I was having all kinds of issues with drivability"
"I moved from my C&L to a ProM and things now are great"

Its hard to recover from talk like that :Word:

Then again ... things started to slowly change for the better

After the word got around about that ...
C&L started to have a different attitude

They then started to make data available
well
Somewhat you might say
but
It was a start never the less

Then ... over time ...
As the self tuning community gained more and more knowledge ...

Pretty good curves for the C&L meters were hacked out
and
They were shared between the community members
So
C&L kinda got a ... default benefit ... from that kinda thing don't ya see

C&L made some changes several years ago with more models available
and
Slowly ... peeps on the boards started to give good reports
so
I suspect ... the quality was improved with the newer units

Now to the present ...

I gotta say some of the most knowledgeable self tuning peeps I know run C&L
meters and have good things to say about them.

So ... there you have it

Yes ... A C&L meter can be a pos
but
It doesn't necessarily have to be a pos

See how you gotta be careful about what info you take to heart

Any of that stuff allow you to see ... Why ... I once felt like I did

Grady
 

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 23, 2008
#15
  • Feb 23, 2008
  • #15
I bought a ECU for a cobra from Autozone worked out great and it was cheap
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Feb 23, 2008
#16
  • Feb 23, 2008
  • #16
Repostyle said:
I hear a lot of people saying stay away from C&L MAS's, but I can't agree with that as I have had no complaints about mine.

I also can't elaborate on why people should not use C&L because the one's saying stay away are not saying why.
Click to expand...
All I can provide is the reasons I don't like C&L meters...

1.
The 'calibration' method leaves much to be desired. You are swapping a stock sensor (which has inherent signal variation), into an aftermarket housing (which will also have some variation), and then forcing a small *sample* of air through a 'Sample Tube' (which probably introduces the most variation of the 3).
If you buy a ProM, PMas, or stock Ford meter... this stack up of variation is greatly reduced. These 3 styles of meters throw the meter on a flow bench and modify the sensor until it reads properly. This is the RIGHT way to calibrate a meter.
(the biggest source of error that seems to come from this type of calibration is the variation due to installation setup in the actual car. This variation will vary from vehicle to vehicle though... Not much we can do about it.... unless a J3 tuner is used...)

2.
The sample tube is located on the outer wall of the meter. This can cause issues with getting consitant airflow over the sensor. The ProM, Pmas, and Ford meters all do a better job of getting a representative measurement of the air that is passing through the entire diameter of the housing.
Think of the 'Other 3' meters as a bird watcher looking out a VERY large window to see hundreds of birds. Think of the C&L meter as a birdwatcher looking through a 1in hole in the wall to see the same hundreds of birds. The C&L birdwatcher will have to position himself just right in front of that hole in order to see what the other birdwatcher can see with relative ease. Even with great care though, the C&L birdwatcher will never get the full view compared to the 'Other 3' birdwatchers.

This item is also why C&L meters will sometimes require clocking in order to calm idle control issues, etc...


3.
C&L has been known to send the wrong sample tube, or otherwise provide bad info. I have recieved sample tubes from them that were not color coded properly, and others that were not color coded at all.
Also, they have instructed me to run a 'different' calibration tube, compared to what their calibration page called out, because I had a 408w stroker.
I still don't see the logic in that... and they are still telling others similar things.




Grady is correct on several points, and aftermarket tuners have made using a C&L meter easier.
However, I still had 'tune' issues with my 73mm C&L after a couple of months with the tweecer though...

But, in my opinion, the C&L meters are not nearly as good as the other stuff out there.


just my opinion though,
jason
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Feb 23, 2008
#17
  • Feb 23, 2008
  • #17
[URL="http://www.stangnet.com said:
mustang[/URL]fan1990, post: 7363047"]I bought a ECU for a cobra from Autozone worked out great and it was cheap
Click to expand...
Care to elaborate?
maf?
injector?

???
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Feb 25, 2008
#18
  • Feb 25, 2008
  • #18
yeah, just how "cheap " is an ECU from autozone?
 
You must log in or register to reply here.

Similar threads

S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
Electrical 88 EEC Injectors batch firing ?
  • Dustin 86GT
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
659
Fox 5.0 Mustang Tech Jan 8, 2026
gkomo
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
C
03 Cobra Low Fuel Pressure
  • CTsnake_03
  • Mar 17, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
452
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
CTsnake_03
C
Pro flow serial number
  • Andresquintana.mma
  • Mar 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
779
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 19, 2025
Andresquintana.mma
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?