260whp

I

IntenseBlue

Member

Jul 10, 2005

946

0

16

Oct 3, 2006

#1

• Oct 3, 2006

• #1

Ok have a question or two.

How far of a stretch would this be?

Could I make 255whp with a fresh factory bottom end, stock E7 heads, a TMoss lower intake, an XE258HR comp cams that has a 1300-5300rpm powerband, 1.6 roller rockers, UD pulleys, BBK unequal headers, MAC o/r H and MAC catback?

If not how about a fresh stock bottom end with factory E7 heads, a Cobra/GT40 intake, 65mm Accufab TB, Comp Cams XE264HR cam that has a 1500-5500rpm powerband, 1.6 roller rockers, UD pulleys, BBK Longtubes, Dr. Gas o/r Xpipe and a MAC catback?

This is all through a T5. I would have a custom tune with both of these setups also.

 

G

GTOreturns

Well-Known Member

Oct 1, 2003

51

17

59

West Coast Best Coast

Oct 4, 2006

#2

• Oct 4, 2006

• #2

if you massage the stock heads you will!! Ive seen 250-270 RWH with a T-Moss/Thumper combo. Thumper ports stock E-7 heads. I have this combo but never had it dynoed!

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Oct 4, 2006

#3

• Oct 4, 2006

• #3

Guess my weight (or HP) threads are not technical in nature.

-- Moved to Talk --

For more detail on what constitutes a Tech question; Pleaes refer to the sticky at the top of the forum.

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Oct 4, 2006

#4

• Oct 4, 2006

• #4

I doubt your going to see 250+ rwhp on stock E7s. With work done to them of course, but with untouched E7s, and a stock intake (even ported) I doubt 255 rwhp. My guess, 245 tops...

 

D

DeVus1

Founding Member

Mar 29, 2002

400

2

28

P-Town, Va.

Oct 4, 2006

#5

• Oct 4, 2006

• #5

I dont see 260rwhp. Might get it to the flywheel though.

 

DMAN302

My mom says thanks for the pearl necklace.

Nov 8, 2003

2,120

2

59

windsor, Canada

Oct 4, 2006

#6

• Oct 4, 2006

• #6

not likely, heads combined with intake are what makes the combo...cam is important but but an item that is far more limited by the heads/intake than the heads/intake are limited by the cam selection..if that makes sense.
Your looking at a typical 230RWHP combination of parts.

 

tmoss

Gettin Wired

Founding Member

Jun 28, 2001

7,153

32

128

Saint Louis, MO

Oct 4, 2006

#7

• Oct 4, 2006

• #7

The second combo with GT40 heads and either intake mentioned would prob make that power.......

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Oct 4, 2006

#8

• Oct 4, 2006

• #8

Worked E7s on that combo could do it too, all depends what you would want to spend on junk iron heads!

 

tmoss

Gettin Wired

Founding Member

Jun 28, 2001

7,153

32

128

Saint Louis, MO

Oct 4, 2006

#9

• Oct 4, 2006

• #9

Yeah, you can find GT40/GT40P for less than the pro-worked E7s - but both will do it.

 

25thmustang

Mustang Master

Sep 5, 2003

2,021

85

99

Montgomery, NY

Oct 4, 2006

#10

• Oct 4, 2006

• #10

I agree, E7s are worth nothing to people. Unless you have E7s and need to get GT40s it would be smarter and easier to grab some 40s. 260 rwhp is easy to get with a cammed GT40 combo and should run hard!

 

T

Topdowncruise

New Member

Apr 7, 2005

207

0

0

Canada

Oct 6, 2006

#11

• Oct 6, 2006

• #11

Any of the aftermarket aluminum heads would get you there out of the box.I had both of those cams with my combo.I pulled out the 264 after a month and put in the 258.I don't think it caused any significant drop in high rpm HP but low end torque/driveability improved a lot with the 258 while still giving me more power over the stock cam.

 

90mustangGT

I felt sorry for girls because

Founding Member

Jan 15, 2002

2,773

17

89

Dallas, GA

Oct 6, 2006

#12

• Oct 6, 2006

• #12

Home porting heads, if done right, can really flow. There is a home porting kit you can get off ebay or summit, my buddy used it on his and got great results. It comes with instructions in a video. E7 are worth just a little more than the scrap iron they are made of, so you can get them cheap. Let a machine shop do a good valve job, 3 angle or more, and get some new springs. Iron is kind of hard to port, but if you have the time, you can get results. TMOSS does the lower too good for too little to pass that up. I also agree with a very mild cam. You'll crack at least 260. Be sure to have a larger TB and MAF. Free flowing exaust will also get you there nicley.