3.08 gears with a manual trans

I would get a few carriers for the Corvette
Nice
I would sure put 4.11 in one of them and go with that for at least a year
Might be able to pull the front wheels
I have 4.56 in the 9 inch in My 69 and can pull the front wheels
Fun stuff
3 carriers 3.08, 3.50 and 4.11
 
  • Like
Reactions: nickyb
I remember years ago driving a GT40 headed combo with a T5 and 3.08 gears and thought it was the nicest geared combo ever. Lots of low end torque and enough gear you didn't feel like you were always shifting.

Some days I hate my 3.73's. Too much torque to really lay into it in 1st gear, and when just driving, i sometimes feel like going through an intersection I need to get through 1st too fast and shift to 2nd before I'm through.

Ultimately depends on what you are doing with the car, but for a cruise build, my gears of choice would be 3.08, 3.27/3.31 or maybe 3.55's. If you plan on racing often, then obviously go 3.55/3/73/4.10
 
I remember years ago driving a GT40 headed combo with a T5 and 3.08 gears and thought it was the nicest geared combo ever. Lots of low end torque and enough gear you didn't feel like you were always shifting.

Some days I hate my 3.73's. Too much torque to really lay into it in 1st gear, and when just driving, i sometimes feel like going through an intersection I need to get through 1st too fast and shift to 2nd before I'm through.

Ultimately depends on what you are doing with the car, but for a cruise build, my gears of choice would be 3.08, 3.27/3.31 or maybe 3.55's. If you plan on racing often, then obviously go 3.55/3/73/4.10
Time for better suspension and sticky tires! :jester:
 
I remember years ago driving a GT40 headed combo with a T5 and 3.08 gears and thought it was the nicest geared combo ever. Lots of low end torque and enough gear you didn't feel like you were always shifting.

Some days I hate my 3.73's. Too much torque to really lay into it in 1st gear, and when just driving, i sometimes feel like going through an intersection I need to get through 1st too fast and shift to 2nd before I'm through.

Ultimately depends on what you are doing with the car, but for a cruise build, my gears of choice would be 3.08, 3.27/3.31 or maybe 3.55's. If you plan on racing often, then obviously go 3.55/3/73/4.10
That’s how I felt with my old 3.73’s. I would be shifting into second before I got to the opposite crosswalk in an intersection. Ripping it from first gear was instant tire shredding, but I did just have normal sporty-ish tires, not drag radials or anything.

I like the gears I have in my current Fox… need to figure out if they are 3.31’s or 3.55’s (is 3.31 even an option? PO said 3.31’s…).
 
I like the gears I have in my current Fox… need to figure out if they are 3.31’s or 3.55’s (is 3.31 even an option? PO said 3.31’s…).
3.31 are the common gear in S197 and newer cars - kind of like how the 2.73/3.08s were with the foxbody.

SN and New Edge are typically 3.27 stock (most of the ones I've seen at least).