3-Link Rear suspension?

[Evolution]

(If the 3 link is ultimately designed to work with the watts, I'm screwed anyways since I still have to get rid of my exhaust pipes.....)

You do not need to scrap your exhaust pipes with the watts. They just need a few mods.

Mike

 

[san~man]

So, here is a general summary of what you could end up with.

Watts and Three Link
Watts and Stock UCAs
Watts and TA
Panharad bar and Three Link
Panhard Bar and TA
Panhard Bar and Stock UCAs

Does this make sense?

Absolutely....thanks again Mike.

Now, approximate release date on the 3 link? (says TBA on the website).

 

[san~man]

You do not need to scrap your exhaust pipes with the watts. They just need a few mods.

Mike

Good, but has anyone ever installed your system with my brand of exhaust, and if so, how much modification was necessary?

 

[Evolution]

The approximate release date of the three link will be somwhere in the next two months...Most likely the early march timeframe.

As for your exhaust, all exhaust systems will need the same type of modification over the axle. If your tailpipes are larger than stock and your car is lowered you may need a little more modification, but youcan still retain the rear exit nature of the exhaust.

Thanks....Mike

 

[Twisted]

Do you have pictures with the exhaust in place?

 

[mity2]

what is the benefit of 3 link system?

 

[Evolution]

Do you have pictures with the exhaust in place?

You can check out page 20 of our Watts instructions. That should give you a general idea of what the exhaust looks like in place.

http://www.evolutionmsport.com/Watts-website.pdf

There was a thread on corner carvers that showed some pretty nice pics of the exhaust mods, but the pictures are gone. For reference here is the thread:

http://corner-carvers.com/forums/showthread.php?threadid=13234

Does this help?

Thanks...Mike

 

[Hoppy]

Ford's 3-link for the '05 Stang

Hop