351

[SMOKEDYA]

I picked up a 351 to swap in the 93, what all off the 5.0 will work? I'm useing my heads off the 5.0 and i think thats just about all that will work? I have a tubalar k member so will i be able to use my 5.0 L/T's? Can i use the 5.0 oil pan and pick up. How do i figure out what fly wheel and harmonic balancer to use on the 351.My old 5.0 is for sale in parts or complete minus the heads but i have a set of 351 heads to put on it. peace



john

 

[wicked93]

I picked up a 351 to swap in the 93, what all off the 5.0 will work? I'm useing my heads off the 5.0 and i think thats just about all that will work? I have a tubalar k member so will i be able to use my 5.0 L/T's? Can i use the 5.0 oil pan and pick up. How do i figure out what fly wheel and harmonic balancer to use on the 351.My old 5.0 is for sale in parts or complete minus the heads but i have a set of 351 heads to put on it. peace



john

first off the heads bolt holes will need to be enlarged to 1/2 inch and you can use the front timing chain cover but other than that nothing. the 351w where 28oz while the 5.0 is 50oz hope this helps

 

[SMOKEDYA]

Yes it helps! I knew about the head bolts i plan to take them to work to put in the press to drill them. As far as the balancer and flywheel thanks! Will my spec stage 2 clutch off the 5.0 work on the 351? peace





john

 

[Mustang78]

your clutch will work, all 351's are 28ooz imbalance..most likely your 5.0 headers wont work, almost guaranteed.. you need the 351w-fox swap oil pan, dipstick/tube, and pickup tube along with swap headers. 351w distributor, intake, etc.. stock motor mounts will work, good luck and PM me if you have any specific questions, i've been through it all..