351w swap help

Reddevil91 said:

Thanks man I’ll have to look into this bc if I could save on running my current long tubes that would be great. Also on the flip side what would be the down side of that 1.5in drop if any on a street car?

Click to expand...

Reddevil91 said:

Thanks man I’ll have to look into this bc if I could save on running my current long tubes that would be great. Also on the flip side what would be the down side of that 1.5in drop if any on a street car?

Click to expand...

Driver460sz said:

Found my list of things!!!

427ci Ford Small Block

Cylinder Heads are 210cc Pro Comp Aluminum

60cc Chamber, 2.020 In valves (severe duty), 1.600 Ex valves (severe duty)7/16 rocker studs, 10 degree machine keepers, 10 chrome moly retainers, 1.460 dia valve springs.



351w Ford Engine Block - A Ford Roller Block Was Used.

Block was square decked

Block was line honed

Block was square bored and honed with honing plates

Engine was trial assembled twice

Lifter bores are honed



427ci Ford Parts List Break Down

Forged Wiseco pistons .040, File Fit rings .040 over, Clev H series std bearings, 4340 steel 4.170 stroke crank 28oz, SIR 4340 rods 6.200infloated, ARP Main Bolts, Felpro Rear main seal, Brass freeze plugs, Durbond Cam bearings, Trickflow Hyd. Roller lifters, Double roller Timing set, Mellings oil pump pickup, Mellings Oil Pump, ARP head bolts, A complete gasket set, Oil and Filter 15-40w, A Foxbody conversion rear sump oil Pan, Stage 2 trickflow roller cam, Harmonic balancer 4 bolt, A set of 1PC Pushrods, A Aluminum Timing Cover, Trickflow 1.6 roller rockers

Intake Trickflow TFS-51511006 Upper and lower 90mm with 3/8 spacer.



Speed Density, Microsquirt PnP

Swap AC /PS bracket

47lb Injectors using EV6 adaptors

90mm TB Accufab

High flow water pump

BBK fuel rails.

Delete - EGR, Char can.

3G alt

High-Performance TFI (Distributor already has one. This is an extra one...perhaps not needed).

Trick Flow Valve covers

Wires

Plugs

Wire separator - black

Vac. lines (Tree to wall plus PCV)

Battery

Starter Solenoid

Rad (3 row with dual fans)

255 lph in tank fuel pump

Russel fuel lines

BBK shorty headers

McLeod Street Extreme clutch (700 hp rated)

TKO trans

Clutch fork

Rear main seal

BBK cold air intake

3 inch cowl hood (Tru Fiber)

Click to expand...

nickyb said:

hay 460 you said stock hood fit but your list states 3 inch cowl hood? What gives?

Click to expand...

nickyb said:

hay 460 you said stock hood fit but your list states 3 inch cowl hood? What gives?

Click to expand...

nickyb said:

hay 460 you said stock hood fit but your list states 3 inch cowl hood? What gives?

Click to expand...

CarMichael Angelo said:

“ Hay” is for horses..” Hey” is just a rude way to get someone’s attention.

Click to expand...