5.0 Trickflow intake question

F

fastford87

New Member

May 17, 2009

18

0

0

Ringgold, GA

Jun 1, 2009

#1

• Jun 1, 2009

• #1

I have a Trickflow track heat intake for a 5.0 and installed it this weekend. I am wondering if any one has one of these or a streetburner on thier car. I was wanting to know if the plenium wistled. I have sprayed eather around it and no leak. Plus now its surging between 800 and 1000 rpm. Do I need to take the egr part/section off the throttlebody? If anyone has any idea let me know. Thanks

 

Kid wita 5oh

I'm definitely not in the original hole

Founding Member

Nov 5, 2000

1,415

154

93

Saugus, MA

Jun 1, 2009

#2

• Jun 1, 2009

• #2

FIRST OFF........ETHER IS VERY VOLATILE......DONT USE IT!!!!

use a carb cleaner or brake clean, as they wont explode in your face if something should go a stray

I run a TFS R series on my 351...no whistle or surge...definatly sounds like you have a leak some where, also check your TPS voltage... i've seen that cause surging issues also..

 

D

Deleted member 87397

Jun 2, 2009

#3

• Jun 2, 2009

• #3

What kind of throttle body are u running? Many of the aftermarket ones will whistle even though installed correctly. The surge could be TPS or an idle air issue.

 

F

fastford87

New Member

May 17, 2009

18

0

0

Ringgold, GA

Jun 2, 2009

#4

• Jun 2, 2009

• #4

fastfox86 said:

What kind of throttle body are u running? Many of the aftermarket ones will whistle even though installed correctly. The surge could be TPS or an idle air issue.

Click to expand...

It has a 75mm t/b egr spacer and this set up was on a stock H.O intake and run fine no whistles