• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

5.0M/SF tests the Trick Flow intake

  • Thread starter Thread starter san~man
  • Start date Start date Apr 28, 2007
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
Apr 28, 2007
#1
  • Apr 28, 2007
  • #1
Just got my issue in the mail today, and they test the new "Track Heat" intake on a bone stock GT.

Interesting results:

At 1900, there's only 3.2HP gain but 158.12 TQ (max tq gain)

At 5300, 20.06HP gain but -1.42 TQ (max HP was at 6k, +22.06)

Discuss....
 
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
Apr 28, 2007
#2
  • Apr 28, 2007
  • #2
Here's the correct numbers, for anyone following the debacle:

RPM BASELINE BASELINE TFS TFS DIFF DIFF
POWER TORQUE POWER TORQUE POWER TORQUE
1500 65.42 229.06 N/A N/A N/A N/A
1600 69.67 228.70 N/A N/A N/A N/A
1700 73.55 227.23 73.54 227.17 -0.01 -0.06
1800 78.81 229.95 81.75 238.53 2.94 8.58
1900 86.12 238.06 89.32 246.91 3.20 8.85
2000 92.74 243.54 96.23 252.70 3.49 9.16
2100 100.56 251.50 101.98 255.05 1.42 3.55
2200 106.19 253.51 106.58 254.43 0.39 0.92
2300 111.06 253.61 110.92 253.29 -0.14 -0.32
2400 116.30 254.51 115.96 253.76 -0.34 -0.75
2500 118.40 248.74 121.98 256.26 3.58 7.52
2600 120.73 243.88 128.13 258.83 7.40 14.95
2700 127.01 247.06 134.47 261.58 7.46 14.52
2800 134.27 251.86 139.82 262.27 5.55 10.41
2900 140.06 253.66 144.97 262.54 4.91 8.88
3000 146.03 255.65 150.47 263.42 4.44 7.77
3100 153.18 259.52 155.98 264.27 2.80 4.75
3200 156.40 256.70 160.86 264.02 4.46 7.32
3300 164.93 262.49 166.24 264.57 1.31 2.08
3400 172.39 266.30 171.61 265.09 -0.78 -1.21
3500 179.07 268.71 176.75 265.24 -2.32 -3.47
3600 185.23 270.23 181.82 265.26 -3.41 -4.97
3700 191.41 271.70 187.14 265.65 -4.27 -6.05
3800 198.66 274.57 191.97 265.33 -6.69 -9.24
3900 204.44 275.32 197.79 266.37 -6.65 -8.95
4000 210.66 276.60 203.24 266.86 -7.42 -9.74
4100 215.06 275.49 209.67 268.59 -5.39 -6.90
4200 219.13 274.02 215.06 268.93 -4.07 -5.09
4300 222.51 271.78 220.70 269.56 -1.81 -2.22
4400 225.31 268.94 225.58 269.26 0.27 0.32
4500 227.82 265.90 230.26 268.75 2.44 2.85
4600 230.24 262.88 233.83 266.98 3.59 4.10
4700 233.40 260.82 237.99 265.95 4.59 5.13
4800 235.32 257.48 240.90 263.60 5.58 6.12
4900 235.69 252.63 243.72 261.24 8.03 8.61
5000 234.27 246.08 245.26 257.63 10.99 11.55
5100 233.22 240.17 247.50 254.89 14.28 14.72
5200 230.85 233.16 248.48 250.97 17.63 17.81
5300 228.93 226.86 248.99 246.74 20.06 19.88
5400 226.05 219.86 246.19 239.45 20.14 19.59
5500 225.99 215.80 244.46 233.45 18.47 17.65
5600 224.83 210.86 243.75 228.61 18.92 17.75
5700 222.83 205.32 241.64 222.65 18.81 17.33
5800 219.58 198.84 238.65 216.11 19.07 17.27
5900 215.70 192.01 234.36 208.63 18.66 16.62
6000 211.60 185.22 233.66 204.53 22.06 19.31
 

Redfire03GT

New Member
Sep 10, 2003
395
0
0
Newark, CA.
Apr 28, 2007
#3
  • Apr 28, 2007
  • #3
san~man said:
Just got my issue in the mail today, and they test the new "Track Heat" intake on a bone stock GT.

Interesting results:

At 1900, there's only 3.2HP gain but 158.12 TQ (max tq gain)

At 5300, 20.06HP gain but -1.42 TQ (max HP was at 6k, +22.06)

Discuss....
Click to expand...

Maybe I'm reading it wrong but that info seems contradicting.

In the listing, 5300 shows this..

rpm---base----base-----trick-----trick------diff-----diff
---------hp-------tq-------flow-----flow-------hp-----tq
5300 228.93 226.86 248.99 246.74 20.06 19.88

Seems the gain on hp is correct but the torque is not. Which maybe was a typo of some sort so, forgive me on that part. Either way, I still remain skeptical. The runner length does not appear to be any where near the same as the stock intake. Which their runner design promotes good low end torque without too much drop off at high end. Although the stock long runner design makes for poor hp capacity in the high rpm's. So it almost seems like they managed to merge the two.

What this magazine test is claiming is that a design similar to the bullitt intake manifold was not only able to produce positive hp and tq gains over stock but sufficiently surpass it. If the numbers are true, then we should all rejoice but, you have to be a tad skeptical. It hardly loses any low end torque and manages to maintain a steady increase on top of still producing a stale yet consistent hp increase until 4800 rpms. Where at 4900 rpm's it starts to seem like it's making it's moneys worth.

Don't get me wrong, kudos to Trick Flow if they just pulled off the practically improbable to the 2V crowd. I'll look forward to having one on my car some day. If the gains are real.
 
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
Apr 28, 2007
#4
  • Apr 28, 2007
  • #4
Ya, there was a typo in the mag it seems. Threads on every mustang board confirm that fact, and the TF rep posted those correct numbers.
 

Redfire03GT

New Member
Sep 10, 2003
395
0
0
Newark, CA.
Apr 28, 2007
#5
  • Apr 28, 2007
  • #5
Ah I see. Either way, they still seem able to produce power in ways that no other manufacturer was able to. What puzzles me is the idea of it producing more torque in general than our stock intake with a runner design to doesn't nearly have the same length as the stocker.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 28, 2007
#6
  • Apr 28, 2007
  • #6
Damn, those are much better numbers than alot of people were thinking it would be. Looks like with that intake, some cams, and headers my car will easily be over 305-315rwhp
 

mity2

I like Pro3 and all I got was this crappy CT.
Jul 24, 2003
2,872
3
48
StateCollege PA
Apr 28, 2007
#7
  • Apr 28, 2007
  • #7
it gained tq at low RPM range where 4.6 is lacking. i think this is good number no?
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Apr 28, 2007
#8
  • Apr 28, 2007
  • #8
If its true ill "help" my pos plastic one crack and replace it with the TrickFlow.

Im waiting on someone from here or another reputable forum to personally install and dyno one with a before and after comparison.
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
Apr 28, 2007
#9
  • Apr 28, 2007
  • #9
Damn you just got the issue
 

ScortLX

Founding Member
Mar 20, 2001
261
0
16
Parker, Colorado
Apr 28, 2007
#10
  • Apr 28, 2007
  • #10
Hey everyone, I've already pretty much decided to be a guinea pig for all of the bolt on crowd out there. I will be doing one dyno session for a base line and then dynoing the car with the Intake and all its parts ONLY. I will be leaving the stock TB on the car as well for both intakes. My plan is to do both dyno runs over the course of no more than a week. I wish I could do it closer together but I really don't have the opportunity. I will then post my results on the boards (here and Modular Depot). I will not be doing any tuning to the car at all just to see what the bolt-on gains or losses are going to be on a non-cammed, stock headed car. Now if it would only just come out I could start to plan for the dyno runs and the swap. :SNSign:
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Apr 28, 2007
#11
  • Apr 28, 2007
  • #11
i'll test it for the s/c crowd. i'll have a dyno run before and after it when the new engine goes in after MW though.
 

Seraphitia102

will post boobie pics for a supercharger
Oct 11, 2004
737
1
16
California
Apr 29, 2007
#12
  • Apr 29, 2007
  • #12
So I won't be gaining 150-ish lb. ft. torque at 1700rpms?
 

ScortLX

Founding Member
Mar 20, 2001
261
0
16
Parker, Colorado
Apr 29, 2007
#13
  • Apr 29, 2007
  • #13
Thats a big no on the huge torque gain at 1700 rpm . Hopefully I gain a little though in that range!
 

four six

Member
Jan 19, 2006
506
2
18
Hobart, IN
Apr 29, 2007
#14
  • Apr 29, 2007
  • #14
But is it out yet? (for sale)
 
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
Apr 29, 2007
#15
  • Apr 29, 2007
  • #15
four six said:
But is it out yet? (for sale)
Click to expand...

Not ATM.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Apr 29, 2007
#16
  • Apr 29, 2007
  • #16
here are the corrected numbers / Brian @ TFS posted this on another site regarding this article misprint , hope this clears things up

peak LOW end torque gain 14.95 at 2600 RPM
peak HP gain 22.06 at 6000 RPM

lacking a little from 3400-4300 RPM


RPM BASELINE BASELINE TFS TFS DIFF DIFF
POWER TORQUE POWER TORQUE POWER TORQUE
1500 65.42 229.06 N/A N/A N/A N/A
1600 69.67 228.70 N/A N/A N/A N/A
1700 73.55 227.23 73.54 227.17 -0.01 -0.06
1800 78.81 229.95 81.75 238.53 2.94 8.58
1900 86.12 238.06 89.32 246.91 3.20 8.85
2000 92.74 243.54 96.23 252.70 3.49 9.16
2100 100.56 251.50 101.98 255.05 1.42 3.55
2200 106.19 253.51 106.58 254.43 0.39 0.92
2300 111.06 253.61 110.92 253.29 -0.14 -0.32
2400 116.30 254.51 115.96 253.76 -0.34 -0.75
2500 118.40 248.74 121.98 256.26 3.58 7.52
2600 120.73 243.88 128.13 258.83 7.40 14.95
2700 127.01 247.06 134.47 261.58 7.46 14.52
2800 134.27 251.86 139.82 262.27 5.55 10.41
2900 140.06 253.66 144.97 262.54 4.91 8.88
3000 146.03 255.65 150.47 263.42 4.44 7.77
3100 153.18 259.52 155.98 264.27 2.80 4.75
3200 156.40 256.70 160.86 264.02 4.46 7.32
3300 164.93 262.49 166.24 264.57 1.31 2.08
3400 172.39 266.30 171.61 265.09 -0.78 -1.21
3500 179.07 268.71 176.75 265.24 -2.32 -3.47
3600 185.23 270.23 181.82 265.26 -3.41 -4.97
3700 191.41 271.70 187.14 265.65 -4.27 -6.05
3800 198.66 274.57 191.97 265.33 -6.69 -9.24
3900 204.44 275.32 197.79 266.37 -6.65 -8.95
4000 210.66 276.60 203.24 266.86 -7.42 -9.74
4100 215.06 275.49 209.67 268.59 -5.39 -6.90
4200 219.13 274.02 215.06 268.93 -4.07 -5.09
4300 222.51 271.78 220.70 269.56 -1.81 -2.22
4400 225.31 268.94 225.58 269.26 0.27 0.32
4500 227.82 265.90 230.26 268.75 2.44 2.85
4600 230.24 262.88 233.83 266.98 3.59 4.10
4700 233.40 260.82 237.99 265.95 4.59 5.13
4800 235.32 257.48 240.90 263.60 5.58 6.12
4900 235.69 252.63 243.72 261.24 8.03 8.61
5000 234.27 246.08 245.26 257.63 10.99 11.55
5100 233.22 240.17 247.50 254.89 14.28 14.72
5200 230.85 233.16 248.48 250.97 17.63 17.81
5300 228.93 226.86 248.99 246.74 20.06 19.88
5400 226.05 219.86 246.19 239.45 20.14 19.59
5500 225.99 215.80 244.46 233.45 18.47 17.65
5600 224.83 210.86 243.75 228.61 18.92 17.75
5700 222.83 205.32 241.64 222.65 18.81 17.33
5800 219.58 198.84 238.65 216.11 19.07 17.27
5900 215.70 192.01 234.36 208.63 18.66 16.62
6000 211.60 185.22 233.66 204.53 22.06 19.31
 

XtorT'r

New Member
Jun 11, 2003
381
0
0
Minnesota, YAAA
Apr 29, 2007
#17
  • Apr 29, 2007
  • #17
once I start seeing people get this and they confirm these gains I'll start saving for one.
 

Redfire03GT

New Member
Sep 10, 2003
395
0
0
Newark, CA.
Apr 29, 2007
#18
  • Apr 29, 2007
  • #18
Realistically, if these gains are even remotely close to actual gains, it should be a good seller for Trick Flow. I'd wager to say that the average peak hp gains might be in the range of 10-15rwhp on N/A cars.
 
S

san~man

O-G
Founding Member
Nov 29, 1999
8,546
3
78
A little grass shack on a big lava rock
Apr 29, 2007
#19
  • Apr 29, 2007
  • #19
2002BLGT said:
here are the corrected numbers / Brian @ TFS posted this on another site regarding this article misprint , hope this clears things up

peak LOW end torque gain 14.95 at 2600 RPM
peak HP gain 22.06 at 6000 RPM

lacking a little from 3400-4300 RPM
Click to expand...

Errr, I posted that in my second post
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Apr 29, 2007
#20
  • Apr 29, 2007
  • #20
I plotted it for you folks. Makes power after 4400rpm. Pretty good really. Hope the dyno numbers aren't fudged. I will be buying one if not. Will the steeda strut brace clear it i wonder?

 

Attachments

  • TFS Track Heat Dyno.webp
    30.4 KB · Views: 323
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

Engine '88 GT Has No Power Above 3000 RPM After Trick Flow 11r Heads Install
  • JRerecich
  • Feb 12, 2020
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
67
Views
11K
Fox 5.0 Mustang Tech Feb 23, 2020
tinker451
T
N
SOLD Supercharged 1989 SSP Coupe $13,500 obo
  • notchlubber
  • Jul 17, 2018
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
13K
Fox Body Mustangs For Sale (1979-93) May 28, 2020
notchlubber
N
R
Lincon Mk Vii - Trick Flow & Supercharged- Report
  • Rapalyea
  • May 2, 2016
  • Fox 5.0 Mustang Tech
Replies
0
Views
3K
Fox 5.0 Mustang Tech May 2, 2016
Rapalyea
R
Finally! A valid TFS-R and TFS Box R intake dyno comparison on a street stroker.
  • FastDriver
  • Oct 19, 2011
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
58
Views
38K
Fox 5.0 Mustang Tech Sep 6, 2025
FastDriver
M
  • Locked
Trick Flow R 351W Intake F/S
  • midnight coupe
  • Feb 5, 2010
  • Engine and Power Adder Parts
Replies
1
Views
2K
Engine and Power Adder Parts Feb 9, 2010
midnight coupe
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?