• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

'65 V8 Manual Steering Photo needed!

  • Thread starter Thread starter 65stanger
  • Start date Start date Nov 27, 2004

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Nov 27, 2004
#1
  • Nov 27, 2004
  • #1
As part of my resto / mod on my '65 stang, I'm upgrading the front suspension and steering to the V8 parts.

According to ALL the catalogs the Pitman arm and the Idler arm are the same, in both the I6 and V8 configurations.

However, the new Idler arm I have does not match any of the diagrams, or my old Idler arm. Nor does my old Pitman arm match any of the diagrams. INCLUDING the diagram in the FORD SHOP MANUAL! Yes SuperDave, I'm reading the FSM!

PLEASE!!!! Does anyone have a photograph, or can any one get a photo, of the MANUAL steering set-up for a 1965 with a V8.

Thanx!
 

WORTH

20+ Year Stangneter
Nov 18, 2002
2,166
44
98
Cape Cod, Ma.
Nov 27, 2004
#2
  • Nov 27, 2004
  • #2
65stanger said:
As part of my resto / mod on my '65 stang, I'm upgrading the front suspension and steering to the V8 parts.

According to ALL the catalogs the Pitman arm and the Idler arm are the same, in both the I6 and V8 configurations.

However, the new Idler arm I have does not match any of the diagrams, or my old Idler arm. Nor does my old Pitman arm match any of the diagrams. INCLUDING the diagram in the FORD SHOP MANUAL! Yes SuperDave, I'm reading the FSM!

PLEASE!!!! Does anyone have a photograph, or can any one get a photo, of the MANUAL steering set-up for a 1965 with a V8.

Thanx!
Click to expand...

I have the early 65 at the shop, I can take some shots monday if you dont get anything before then.
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Nov 27, 2004
#3
  • Nov 27, 2004
  • #3
Thanx
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Nov 27, 2004
#4
  • Nov 27, 2004
  • #4
bump
 

latamud

Founding Member
Oct 22, 2002
791
2
19
Tampa, FL
Nov 28, 2004
#5
  • Nov 28, 2004
  • #5
http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=MPFMP&Category_Code=idler
compare the idler arms here. The 6th pic down is for I-6, probably what you have(manual steering I-6). I think when I6 had power steering they used the V-8 idler.
http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=MPFMP&Category_Code=pittman, the pitman arm should stay the same.

I just did the swap today. My I-6 steering was PS, had the same stuff as the V-8.
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Nov 28, 2004
#6
  • Nov 28, 2004
  • #6
latamud said:
http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=MPFMP&Category_Code=idler
compare the idler arms here. The 6th pic down is for I-6, probably what you have(manual steering I-6). I think when I6 had power steering they used the V-8 idler.
http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=MPFMP&Category_Code=pittman, the pitman arm should stay the same.

I just did the swap today. My I-6 steering was PS, had the same stuff as the V-8.
Click to expand...
Thanx.....The Idler arm I have matches what they are showing. Weird thing, my I6 Idler arm looks like a combination of their I6 arm, with a shortened version of the bracket.....there is NO nut on either the arm or bracket!

My Pitman arm looks a little like the I6 m/s Idler with the two holes and the offset. The center hole was where the tie rod attached, and the end hole was where the center drag link attached.

Well, it looks like I have two more parts to aquire, an Idler arm bracket and a Pitman arm.

Thanks again!
 
G

gp001

Founding Member
Jun 30, 2001
4,401
0
66
So. Cal.
Nov 28, 2004
#7
  • Nov 28, 2004
  • #7
65stanger said:
Well, it looks like I have two more parts to aquire, an Idler arm bracket and a Pitman arm.

Thanks again!
Click to expand...

If you are not in a hurry I will have a full set available. I bought one of the quicksteer kits that I will be putting on in the next few weeks. I was gonna put them on E-bay, but would rather sell them cheap to the BBFCM. Let me know if you are interested.
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Nov 28, 2004
#8
  • Nov 28, 2004
  • #8
gp001 said:
If you are not in a hurry I will have a full set available. I bought one of the quicksteer kits that I will be putting on in the next few weeks. I was gonna put them on E-bay, but would rather sell them cheap to the BBFCM. Let me know if you are interested.
Click to expand...
Thanx GP......I sent you a PM!
 
You must log in or register to reply here.

Similar threads

S
65 Coupe I6 Auto to 302 EFI 5 Speed Swap
  • Scuderia
  • Feb 3, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
14
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Sep 9, 2025
Noobz347
P
Pitman Arm Swap
  • paur4s
  • Jul 29, 2022
  • Classic Mustang Specific Tech
Replies
1
Views
1K
Classic Mustang Specific Tech Jul 29, 2022
wicked93gs
5
56 wagon with fox 5.0 needs a chevy power steering pump
  • 56 wagon
  • Jan 3, 2024
  • Other Auto Tech
Replies
8
Views
2K
Other Auto Tech Apr 27, 2024
Adieu
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Thursday at 9:44 PM
Noobz347
6
‘65 brake pedal bracket/steering column question
  • 65hardhead
  • Mar 13, 2021
  • Classic Mustang Specific Tech
Replies
8
Views
1K
Classic Mustang Specific Tech Mar 27, 2021
65hardhead
6
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?