69 mustang up on blocks

[BrownPSU78]

so i am putting my 69 mustang coupe up on blocks for the winter....i will be using the time to run new brake lines and do some other minor mods...where should i put the blocks??? like where are the jacking points...please be as specific as possible....like under the front cross members perhaps??what about in the rear??
--Brown

 

[bnickel]

i would put them on the frame rails just in front of the front torque boxes and just behind the rear torques boxes

 

[Max Power]

I am a fan of keeping the springs compressed, so when I do this, I use the lower control arms and the axle/diff.

 

[BrownPSU78]

i hate to admit this but i dont exactly know what torque boxes are...can you post a pic or something..i just want to be sure....

 

[BrownPSU78]

i hate to admit this but i dont exactly know what torque boxes are...can you post a pic or something..i just want to be sure....

 

[1320stang]

Youll notice that the center of the car has no frame rails. The rear frame rails tie into some heavy sheet metal in the rear about the rear seat and the front ones tie into about the bottom of the slope of the front floorboards. Basically the front of the rear wheel well and the rear of the front wheel well, but don't put them under the rocker panels.

 

[1320stang]

Youll notice that the center of the car has no frame rails. The rear frame rails tie into some heavy sheet metal in the rear about the rear seat and the front ones tie into about the bottom of the slope of the front floorboards. Basically the front of the rear wheel well and the rear of the front wheel well, but don't put them under the rocker panels.