70 / 75mm TB?

[damacman]

Which will work best with the TFS Plenum N/A? My mods are in sig . . . may squeeze a little juice down the line, but for now fully N/A.

 

[stimmler]

Although I don't have the trick, I have the Accufab, I would go with the 70 and switch to the 75 later on when your over 350 hp or when you add a supercharger. Thats my 2 and thats what I plan to do with my own. Didn't want to loose the low end trq while I waited.

 

[313Stang]

I have the Trickflow.. I went with a 70mm BBK TB and I like the way it works

 

[damacman]

bump

 

[Dark Knight GT]

My personal opinion is no larger than 70mm. If it were me, I'de probably stick with the stock 65mm throttle body until I did internal motor work or supercharged but thats probably just me.

 

[1tirefire]

I'd stay with 70mm unless going with forced induction. I'm staying n/a and I've got a similar setup with 70mm mac t/b and c&l plenum

 

[damacman]

Why so many for the 75mm TB in the poll, but zero in the thread?

 

[03-s281]

Either one.

 

[damacman]

bump, 75mm is gaining some traction . . .??