Progress Thread 88 Gt T-top- Project problem child

billison · Mar 11, 2019

Yeah, 3 Coats of high build, sand and go.

Nothing except that it should be done thus week

stanglx2002 · Mar 11, 2019

Thanks!

I am needing to redo a set on one of my mustangs

billison · Mar 11, 2019

I’m gonna try and do another set to see if I can sell them.

But high build and a small sanding block

kendawg73 · Mar 11, 2019

and are you just using black trim paint?

billison · Mar 11, 2019

The can is a little different, but I’m using this.

3-4 coats of high build primer , block sand with 600, repeat till smooth, then a couple coats of this.

billison · Mar 11, 2019

Painter called and asked me to swing by tomorrow to check it over and make sure I’m happy And set up the pick up, so either late tomorrow or early Wednesday

BlakeusMaximus · Mar 11, 2019

billison said:
Painter called and asked me to swing by tomorrow to check it over and make sure I’m happy And set up the pick up, so either late tomorrow or early Wednesday

Nice. Are you putting it back together or is the body shop?

billison · Mar 11, 2019

I’m doing all the final stuff, but the body will be together

stanglx2002 · Mar 12, 2019

Mustang5L5 · Mar 12, 2019

Glad you pushed through with it

billison · Mar 12, 2019

They say it’s ready for me to come see.

BlakeusMaximus · Mar 12, 2019

billison said:
They say it’s ready for me to come see.

Looks sweet!

billison · Mar 13, 2019

Got to see her. She’s very nice. She has a couple small Imperfections but nothing crazy. I’m set to pick her up in the morning ( gonna rain today.) then starts the process of getting her together.

I’m so ready to put some miles on this bad girl

Mstng93SSP · Mar 13, 2019

The car looks really nice!!!!

billison · Mar 14, 2019

Might be tomorrow or Monday before she’s home. After really going over the car I found a scratch that needed buffed and they had put the door moldings on wrong. They were glad to fixed it and said several times they’ll keep it till I’m happy.

BlakeusMaximus · Mar 14, 2019

billison said:
The can is a little different, but I’m using this.

3-4 coats of high build primer , block sand with 600, repeat till smooth, then a couple coats of this.

Which high build primer did you use Bill? Im going to be going down that road too.

billison · Mar 14, 2019

I’ll grab a pic tonight, but it was from Walmart. Says it prime and build.

BlakeusMaximus · Mar 14, 2019

billison said:
I’ll grab a pic tonight, but it was from Walmart. Says it prime and build.

Cool, Im sure we have something here at the shop too. Just curious.

billison · Mar 16, 2019

Before and after. Not too bad

Rdub6 · Mar 20, 2019

Keeping us in suspense? Is she home yet?

Progress Thread 88 Gt T-top- Project problem child

I like tinted tail

CT Material here

I like tinted tail

Well-Known Member

I like tinted tail

Attachments

I like tinted tail

Still got to try a little lube on my speedo head

I like tinted tail

CT Material here

That is…until I whipped out my Bissell

I like tinted tail

Still got to try a little lube on my speedo head

I like tinted tail

Attachments

You have a nice rear end there Dave.

I like tinted tail

Still got to try a little lube on my speedo head

I like tinted tail

Still got to try a little lube on my speedo head

I like tinted tail

Attachments

So while I wait to figure out my rear end issues

Similar threads

Privacy & Transparency

Privacy & Transparency