89 Gt

[Dp213]

I just got a 89 GT and I'm getting ready to do a 5 lug conversion. I have the rear covered, but my question is on the front.

I have a set of 96 front spindles. If I run those spindles and use a 3/8 spacer in the rear with 8" wide wheels, would that line up the wheels pretty close.

Thanks

 

[Mustang5L5]

Depends on what conversion you do out back and what 8" wide wheels you are using? Stock 5-lug axles I'm assuming? 3/8" spacer would work. if you really want it flush, you may need up to 3/4" spacers. All going to depend on your particular wheel's offset and BS specs

Up front, you should really use the 94-95 spindles instead.

 

[85ragtop]

Moved to tech.