I dont want to use spacers put them on my jeep a while back and its wobbled ever since even after alignment and balance had to just take em off and not turn at full lockjust get spacers for the rear and go 8.5
you got the wrong ones then budI dont want to use spacers put them on my jeep a while back and its wobbled ever since even after alignment and balance had to just take em off and not turn at full lock
Whats the offset on your wheels?I run 9.5 in the fronts with 255/35r/19. Only thing is at full bank, the rim rubs the sway bar but it's no big deal as you barely back off and it's gone
To be completely honest I wouldn't be able to tell you as I bought the car with the rims... How would I find the offset as I don't believe it's engraved on the wheelWhats the offset on your wheels?
Take a ruler or a level or just something straight and with the wheel off lay it down across the backside of the rim and measure to the hub. Your wheels are 9.5in so if you measured 4.25in to the hub then that would be 0mm offset dead center, 3.75in to the hub would be -12mm or so, and 4.75 to the hub would be +12mm or so bada bing bada boomTo be completely honest I wouldn't be able to tell you as I bought the car with the rims... How would I find the offset as I don't believe it's engraved on the wheel
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?