• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

91-93 2.3 guys

  • Thread starter Thread starter Lilwhitestang
  • Start date Start date Aug 2, 2006

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Aug 2, 2006
#1
  • Aug 2, 2006
  • #1
or maybe if this can refer to earlier years....I was fiddling around with my car earlier and I noticed a plastic flexible tube running from the back of my air box to a metal coating on my header. It wasn't connected to the airbox, just the header. What the hell is it? My car runs fine and it looks like it being disconnected hurts nothing.
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
Buford, GA
Aug 2, 2006
#2
  • Aug 2, 2006
  • #2
It's a stovepipe to preheat the aircharge when it's cold. It won't hurt to be without it, but you may notice it's gone when winter comes.
 

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Aug 2, 2006
#3
  • Aug 2, 2006
  • #3
RustBucket said:
It's a stovepipe to preheat the aircharge when it's cold. It won't hurt to be without it, but you may notice it's gone when winter comes.
Click to expand...
Hmm..no wonder it took so damn long to warm it up. Ill be keeping that.
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Aug 4, 2006
#4
  • Aug 4, 2006
  • #4
It is the same as the tube that used to go from the metal shroud around the exhaust to the air cleaner inlet on carbed cars, and does the same thing.

When cold, there is a vacuum powered door that opens and lets the engine pull air that has been heated by the exhaust, so that it warms up faster.

I'd keep it, it does not cost any power, and may be reqd for visual emissions compliance.

Also, make sure the vacuum line is connected to the motor, or, plugged so that you don't get a vacuum leak from the system.
 
S

Shinlee

New Member
Feb 10, 2006
146
0
0
Aug 4, 2006
#5
  • Aug 4, 2006
  • #5
rd said:
Also, make sure the vacuum line is connected to the motor, or, plugged so that you don't get a vacuum leak from the system.
Click to expand...

there isnt any point in plugging it. its connected to a metal shroud that has 3 bolts that literally just sit ontop of the exhaust manifold. there is nothing to do with the vacum if you disconnect the long metallic tube. Most of the time they end up just rotting away. Now if you disconnect that little black vacum line on top of the intake ( the filter box to be exact ) then you will have a leak and then you will have problems.

the tube from the manifold to the intake isnt really neccessary, and if you were to replace the manifold with like a ranger manifold it has to go anyways, so dont worry about it, if it looks bad get rid of it. If you really want it, go to autozone with the tube IN HAND so you can visually compare to see what you want for a new hose. called a preheater hose btw, at autozone
 

Lilwhitestang

New Member
May 2, 2005
66
0
0
Glasford, IL (Middle of nowhere)
Aug 6, 2006
#6
  • Aug 6, 2006
  • #6
Shinlee said:
there isnt any point in plugging it. its connected to a metal shroud that has 3 bolts that literally just sit ontop of the exhaust manifold. there is nothing to do with the vacum if you disconnect the long metallic tube. Most of the time they end up just rotting away. Now if you disconnect that little black vacum line on top of the intake ( the filter box to be exact ) then you will have a leak and then you will have problems.

the tube from the manifold to the intake isnt really neccessary, and if you were to replace the manifold with like a ranger manifold it has to go anyways, so dont worry about it, if it looks bad get rid of it. If you really want it, go to autozone with the tube IN HAND so you can visually compare to see what you want for a new hose. called a preheater hose btw, at autozone
Click to expand...
Just to be safe, when I first bought my car I looked at the air box and there was only one cord connected to the clips on the top of it. My dad then pulled out a rubber tube that was loose around the airbox and stuck it on the other clip. Is that supposed to be attached? I was just making sure in case I had the wrong thing on there.
 
P

Pro-Hawk

New Member
Dec 4, 2003
971
0
0
West Texas
Aug 7, 2006
#7
  • Aug 7, 2006
  • #7
rd said:
and may be reqd for visual emissions compliance.
Click to expand...


Every state is different but it's required here in Texas. I had some issues passing inspection when I pulled mine off for a CAI kit. You can rig something up if you have to have if for a visual...as for cold starts, I never had an issues without mine but I also live in Texas.
 
You must log in or register to reply here.

Similar threads

  • Locked
93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • The Welcome Wagon
Replies
15
Views
492
The Welcome Wagon Oct 28, 2025
Noobz347
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
R
94’ SN95 - Intermittent lope & bogging at moderate rpm
  • Red5.0ho
  • Nov 2, 2025
  • 1994 - 1995 Specific Tech
Replies
5
Views
398
1994 - 1995 Specific Tech Nov 3, 2025
General karthief
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
444
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
842
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?