92 lx 5.0 vac. / emission lines diagram

Heres a diagram .. not exactly what you have there though but helped me figure out what went where, about the best diagram I could find when I was looking.

**http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg link helps

The picure shows the stock plastic vacuum lines that came on production 5.0 Mustangs from 86-93.

The stock hard plastic vacuum lines have been gone for years on most of the 5.0 Mustangs. Your best bet is to study the vacuum lines and the diagram link that was posted. Some 1/8 rubber vacuum tubing is all that is needed to replace all the lines except the big one in front that goes to the carbon canister solenoid.


See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/ Everyone should bookmark this site.

Ignition switch wiring
http://www.veryuseful.com/mustang/tech/engine/images/IgnitionSwitchWiring.gif

Fuel, alternator, A/C and ignition wiring
http://www.veryuseful.com/mustang/tech/engine/images/fuel-alt-links-ign-ac.gif

Complete computer, actuator & sensor wiring diagram for 88-91 Mass Air Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

Vacuum diagram 89-93 Mustangs
http://www.veryuseful.com/mustang/tech/engine/images/mustangFoxFordVacuumDiagram.jpg

HVAC vacuum diagram
http://www.veryuseful.com/mustang/tech/engine/images/Mustang_AC_heat_vacuum_controls.gif

TFI module differences & pinout
http://www.veryuseful.com/mustang/tech/engine/images/TFI_5.0_comparison.gif

Fuse box layout
http://www.veryuseful.com/mustang/tech/engine/images/MustangFuseBox.gif