are 93 cobra mass air meters really set for 19# injectors??? i have this mass with a 24's
"i know i dont even need 24's" just wondering if there mixed matched
"i know i dont even need 24's" just wondering if there mixed matched
PoopDawg said:93 Cobras came with 24lbs injectors, so a 93 Cobra's MAF should be for 24lbs injectors.
Nick
DMAN302 said:Why are you thinking they may be mixed??
DMAN302 said:if the maf is not for 24's...you likely have found the, or part of the solution to your problem..good luck, hope that takes care of it.
My $ says thats probably the issue. I read where it said the Cobra MAF would run lean up top but I used one with 19's and it ran great. If it was lean I never noticed it but I didnt have a wideband or anything either to verify that. Just my experience.ninety1gt said:just cause i heard that this mass is for 19's with out the cobra computer, i want to swap the 19's back, cause im having some idle issues and missing problems
Michael Yount said:The adjustment for 24# injectors in the Cobras was made in the ecu, not in the maf calibration. However, the transfer function in the Cobra meters IS NOT the same as the transfer function in the stock HO meters. Click on the link below and you'll see the difference. Use a Cobra meter with an HO ecu and you'll be lean in the higher flow ranges. If you simply want to plug one in and go, you'd be better off using the SN95 70mm maf. It's the same size as the Cobra, but the transfer function is a closer match to the HO function.
http://www.veryuseful.com/mustang/tech/engine/93cobra-maf-vs-stock-gt-maf.html
DemonGT said:your fooling the computer by using a C&L meter..the pro-m or pro flow's as they are called now..are calibrated for whatever injector size you have electronically
93 Cobras came with 24lbs injectors, so a 93 Cobra's MAF should be for 24lbs injectors.
Nick