• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

93 LX 5.0 question

  • Thread starter Thread starter Turkey Sammich
  • Start date Start date Jul 12, 2006

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 12, 2006
#1
  • Jul 12, 2006
  • #1
I recently bought a 93 LX 5.0. It has the HO motor in it. I've recieved mixed information about this car. ( As I know little to nothing about cars, sorry to say ). I've always loved the fox mustangs since I saw them.

Anyhow, my question is... What do you believe that I should add to improve performance? I wanted to start with simple low budget projects and work my way up. ( As I'm working 3 jobs and waiting on a possible oversea's deployment ).

This has what has been done to it, so far.
- 3.55 gears, E303 cam, subframe connectors, offroad H pipe, Flowmaster exhaust, fuel pressure regulator, k&n filter, short shifter, and it's been lowed two inches.
 

Attachments

  • stang1.webp
    49.1 KB · Views: 199
  • stang3.webp
    54.8 KB · Views: 171

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Jul 12, 2006
#2
  • Jul 12, 2006
  • #2
The problem with these cars is you dont gain anything from low budget stuff like other cars, the power is in cylinder heads, which run 800-1,500$++. This usually turns into a really long post about how you cant just bolt stuff on and make power, so Im just going to make it short, learn about cars, then figure out what you should do, all the low budget stuff has already been done on the car.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Jul 12, 2006
#3
  • Jul 12, 2006
  • #3
supercharge it, or go with heads/intake sence you got a cam.... about the only things you can now that will get you power!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 13, 2006
#4
  • Jul 13, 2006
  • #4
See the "Useful Technical Thread Index" sticky at the top of the 5.0 Tech forum. There is all kinds of useful information, including budget junkyard upgrades.
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Jul 13, 2006
#5
  • Jul 13, 2006
  • #5
as stated above, the cheap quick stuff has been done.

Heads and an Intake Manifold would make the car a real animal....but do that and now you need new injectors, TB, MAF, and some upgrades to your fuel system to use the full potential of your set up, and to make it safe.

Here is what you should really do.....if you want to know more about these cars start reading the tech section, pay attention to peoples combos usually stated in there signatures.....ask good questions once you have gained some knowledge and you will begin to learn what is needed to make a quick car a fast car.

If it was me i would go like this.............

Aluminum drive shaft
Headers
Remove AC and Smog equipment
Electric fans
a simple tune up ( cap and rotor, plugs and wires....I like the ford 9mm)
Intake manifold
Thumper heads.......Do a search for them on this forum or check out his site
http://www.hunterstyle.com/thumper/

Dont forget the brakes suck on these cars so i would budget in some $$$ for brake upgrades maybe even a 5 lug conversion with newer componants.

Hope this helps you a little
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jul 13, 2006
#6
  • Jul 13, 2006
  • #6
Aliate X said:
The problem with these cars is you dont gain anything from low budget stuff like other cars, the power is in cylinder heads, which run 800-1,500$++. This usually turns into a really long post about how you cant just bolt stuff on and make power, so Im just going to make it short, learn about cars, then figure out what you should do, all the low budget stuff has already been done on the car.
Click to expand...

:Word:
 

MyBad70

Where's my Member?
Jan 30, 2006
0
0
0
Huntsville, AL
Jul 13, 2006
#7
  • Jul 13, 2006
  • #7
you wanna feel it in ur seat...let strype work on it. the power loss will be incredible
lol
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jul 13, 2006
#8
  • Jul 13, 2006
  • #8
MyBad70 said:
you wanna feel it in ur seat...let strype work on it. the power loss will be incredible
lol
Click to expand...

Why don't you go to work
 

MyBad70

Where's my Member?
Jan 30, 2006
0
0
0
Huntsville, AL
Jul 13, 2006
#9
  • Jul 13, 2006
  • #9
im at work...our ISP finally decided to come hook our internet up at the new office lol
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jul 13, 2006
#10
  • Jul 13, 2006
  • #10
MyBad70 said:
im at work...our ISP finally decided to come hook our internet up at the new office lol
Click to expand...

Great! Wanna help me derail some threads
 

MyBad70

Where's my Member?
Jan 30, 2006
0
0
0
Huntsville, AL
Jul 13, 2006
#11
  • Jul 13, 2006
  • #11
lol
i may have to actually go do some work in a min. they expect me to get outa bed, come down here then actually go fix stuff. wtf.

clutch cable this afternoon??
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 13, 2006
#12
  • Jul 13, 2006
  • #12
A big thank you goes out to all the feedback I've recieved.

I'm planning on going with a BBK cold air intake, and then the heads and continue from there.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Jul 13, 2006
#13
  • Jul 13, 2006
  • #13
jinx369 said:
A big thank you goes out to all the feedback I've recieved.

I'm planning on going with a BBK cold air intake, and then the heads and continue from there.
Click to expand...

Just for your info.

Im running heads/cam/intake with a stock throttle body, stock injectors, stock ignition, stock mass air flow sensor and MAF tube, and the stock rubber intake tube, i have no problems with any sort of choking or lean conditions. Once again, your just wasting your money right now with stuff like a cold air intake.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Jul 13, 2006
#14
  • Jul 13, 2006
  • #14
jinx369 said:
A big thank you goes out to all the feedback I've recieved.

I'm planning on going with a BBK cold air intake, and then the heads and continue from there.
Click to expand...

Do an intake manifold at the same time or you will be sorely disappointed with the heads. The stock intake manifold is the bottleneck on the motor.
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 20, 2006
#15
  • Jul 20, 2006
  • #15
This is the direction I'm intending on going.


Aftermarket Ignition System (ACCEL)
BBK 70mm throttle body
EGR Plate
Larger Intake Tube 76mm
BBK Shorty Headers
Hi-Flow Catalitic Converters
MSD Digital 6 Ignition
Underdrive pulleys
Edelbrock Performer Manifold
Edelbrock Heads

:SNSign:
 

carbed87

Member
Jun 5, 2005
215
0
16
Jul 20, 2006
#16
  • Jul 20, 2006
  • #16
wow, the HO huh, you lucked out, my 93 only had the MO (marginal output) so good job on that!




lol, im just kidding. i like the car man, VERY NICE!
 

bryce93lx

Member
Jan 20, 2006
88
1
19
Luke AFB AZ
Jul 20, 2006
#17
  • Jul 20, 2006
  • #17
Hey man that car is very clean congrats on the find, hey what part of Oregon are you from, i am from bandon on the coast, and i also sport a 93' lx
 

s&k stangs

New Member
May 24, 2006
0
0
0
MOnroe, Nc
Jul 20, 2006
#18
  • Jul 20, 2006
  • #18
jinx369 said:
This is the direction I'm intending on going.


Aftermarket Ignition System (ACCEL)
BBK 70mm throttle body
EGR Plate
Larger Intake Tube 76mm
BBK Shorty Headers
Hi-Flow Catalitic Converters
MSD Digital 6 Ignition
Underdrive pulleys
Edelbrock Performer Manifold
Edelbrock Heads

:SNSign:
Click to expand...
IMO , If you're going to drive the car daily,underdrives pulleys are not worth the money. Anything that makes the waterpump turn slower to make power(which makes the engine temp rise, which causes loss in power?)Doesnt make sense maybe they show gains ona Dyno pull or two, but I just cant see doin em on a car that is on the street all the time.Also notice nobody suggested em in their lists.
You wanna do it right the first time. Most bolt ons add very little power,(except for heads,cam,intake) and dont always work well with each other Save your money, Set a hp goal or e.t. goal if your goin to the track regularly, And find the combo that will meet that goal all at once. If you start buyin things one at a time, your gonna end up with a bunch of parts that dont work well together.Find a local engine builder you can trust,and start askin questions. Youll Kick your self spendin a hundred here , two hundred there and in the end, and then every time you change one thing, you have to change something else to make it work. IN the end you'll be spending more time and money than the guy in the lane next to you who had a combo built with kickin your ass in mind.
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 21, 2006
#19
  • Jul 21, 2006
  • #19
bryce93lx said:
Hey man that car is very clean congrats on the find, hey what part of Oregon are you from, i am from bandon on the coast, and i also sport a 93' lx
Click to expand...

Yeah, found her on craigslist. Who would of thought. The prior owner was selling it due to speeding tickets

I'm from Hillsboro, 20 west of Portland.
 
You must log in or register to reply here.

Similar threads

8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
636
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2026
Ryu
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
The Dilemma! 1988 LX 5.0
  • TTSaleen
  • Sep 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
447
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 11, 2025
Noobz347
S
Progress Thread 1989 LX 5.0 convertible - mild project
  • Scott_S
  • Aug 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 5 6 7
Replies
122
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 15, 2026
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?