• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

'97 Spindles, on my '87?

  • Thread starter Thread starter BlackFox5.0
  • Start date Start date Dec 11, 2003

BlackFox5.0

Founding Member
Aug 7, 2000
3,514
1
0
Massachusetts
Dec 11, 2003
#1
  • Dec 11, 2003
  • #1
I got some '97 spindles, I was just curious if I could use them on my car, as opposed to the 2001's I had found and asked about here on the forums

Will they fit my car? If not what exactly is needed to make them fit?

If they don't fit I will just put them on my g/f's '94 (with PBR brakes) and use her spindles
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
Dec 11, 2003
#2
  • Dec 11, 2003
  • #2
The 97 spindles are the same as the 2001's...albeit for the extra clearence for the calipers.
 

BlackFox5.0

Founding Member
Aug 7, 2000
3,514
1
0
Massachusetts
Dec 11, 2003
#3
  • Dec 11, 2003
  • #3
Damn, I really don't feel like tearing apart 2 cars....I was just reading this page and this guy has a '90 that he put 96+ spindles on, he makes no mention of them not fitting, he has aftermarket tierod ends but doesn't say they are needed for these certain spindles.....

All I can really hope for now, is that the '97 spindles will fit the '94, so i can use the '94 spindles....i still don't understand what the differences are....
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
Dec 11, 2003
#4
  • Dec 11, 2003
  • #4
Whoops, after reading back through Matt's site..the 97's may already be clearanced for the pbr's. The difference is in the track width. Read Matt90GT's site.

http://mjbobbitt.home.comcast.net/mustang/5lug.html
 

BlackFox5.0

Founding Member
Aug 7, 2000
3,514
1
0
Massachusetts
Dec 11, 2003
#5
  • Dec 11, 2003
  • #5
i went throught that site like a lice comb, and i can't find anything on fitment/install notes on putting 96+ spindles on a 87-93 Mustang, or anywhere else, i even searched the forums, i'm getting frustrated, i know people have done this, but how!
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
Dec 12, 2003
#6
  • Dec 12, 2003
  • #6
Why wouldn't they fit the same?? I'm assuming with the wider track width and your 87 you'll have tire rub issues. Otherwise i see no problems with them bolting up...but i'm not the brake expert.
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
294
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
2000 GT-Front Brakes Not Releasing
  • stormsedge
  • Aug 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
250
1996 - 2004 SN95 Mustang -General/Talk- Aug 7, 2026
Bronco2fan
B
3.08 gears with a manual trans
  • limp
  • Aug 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
43
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 14, 2026
Qtrhrse23
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
511
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
464
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?