about to do the fox t/b swap

You need this plate if you're not gonna run EGR :

http://www.uprproducts.com/shopping/shopexd.asp?id=383

JUst buy the 75mm plate, like your TB. I had the regular Accufab 75mm, not the race one. Dont remember the difference between the two.

This is what you need:


Also if you still want your cruise control, you need to get a fox 5.0 cruise cable. It is a direct swap.

Def go the 75 spacer...The one in that pic is mine and I had to open it up for a 65, and its a 65 form UPR....
Im adding a Accu 75 to mine this year...I'm sure I'll have to open it up some..

Here's something that may show up...I have done like 3 intakes with the Fox set-up and have had to "shim" the bracket out to get a straight shot for the throttle cable....if you notice an angle or bind in the travel, them shimming it out will help some..I used 1/4" thick washers...

Pic's kinda fuzzy but you get the idea..



I have had excellant results and idle wise with the Fox...The Accu DOESN'T have a small 1/8" hole in the blade...Whether or not that causes and idle issue I don't know?? All the Fox TBs have and they been fine..