• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Aggghhhh! Scary sound coming from car, clip inside - help?

  • Thread starter Thread starter gnat
  • Start date Start date Mar 4, 2004
  • 1
  • 2
Next
1 of 2 Next Last

gnat

New Member
Feb 25, 2004
144
0
0
Mar 4, 2004
#1
  • Mar 4, 2004
  • #1
Anyone know what this may be? It sounds like a rattle and only at low rpms. If I get on it, it goes away. Almost like vibration is causing it, but once I stick my head under the car it sounds far worse. Have a listen?

http://168.9.26.28/stang.mov

Any help would be very appreciated!

It doesnt really sound like a knock, could it be something simple?
 

Zinc001

New Member
Oct 27, 2001
410
0
0
Mar 4, 2004
#2
  • Mar 4, 2004
  • #2
Can't say for sure when I'm not there to hear where it is coming from, but it don't sound good. To me I thought I could still hear it when you reved it up. Just harder to hear over the exhaust.
Doug
 
T

TheWaterSkier

New Member
Feb 9, 2004
10
0
0
Lake Worth, FL
Mar 4, 2004
#3
  • Mar 4, 2004
  • #3
Laptop speakers ain't great, but sounds like an exhaust leak to me.
 
A

akfodysvn

Founding Member
Mar 25, 2002
180
0
16
Kansas
Mar 4, 2004
#4
  • Mar 4, 2004
  • #4
sounds like one of ur flows may have busted a baffle loose! ah i really dunno but that's kinda what it sounds like to me, something rattling in the exhaust.
 

neoclasiccl

Founding Member
Jun 1, 2002
3,043
0
57
Help I can't see !!!!!!
Mar 4, 2004
#5
  • Mar 4, 2004
  • #5
At least your motor is fine. Its something loose or broken in the exhaust.
 

gnat

New Member
Feb 25, 2004
144
0
0
Mar 4, 2004
#6
  • Mar 4, 2004
  • #6
WHEW! Gawwd I was so hoping it wasnt my motor.. and from inside the car it sounds like thin metal exhaust rattle.. but from under the car it sounded worse so I wasn't sure. Under load and driving you cant hear it. Seems to be from vibration at very low rpms or after I let off the gas as the rpms drop.
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Mar 4, 2004
#7
  • Mar 4, 2004
  • #7
Sounds like something in you transmission bellhousing to me.....like a clutch that came apart...........can't really tell from my laptop
 
R

Roush21

New Member
Dec 31, 2003
348
0
0
Mar 4, 2004
#8
  • Mar 4, 2004
  • #8
Get an offroad x or h pipe and take the cats off, sounds like something is either loose/broken in the catalytic converter or in your flowmasters but I would start w/ the cats cuz who wants em anyways???
 

gnat

New Member
Feb 25, 2004
144
0
0
Mar 4, 2004
#9
  • Mar 4, 2004
  • #9
I think I'm gonna cry... called t&j and Jeff said it sounds bad He said take it back to the dealership. I called the dealership and he said it sounded real bad and he didn't want me to drive it and get stuck anywhere. He proceeded to give me the number to roadside assistance and told me to have it towed into the service department. Sad sad, sounds like a rod bearing from talking to them.
 

1fast03pony

Member
Jul 1, 2003
749
0
17
New york
Mar 4, 2004
#10
  • Mar 4, 2004
  • #10
gnat said:
I think I'm gonna cry... called t&j and Jeff said it sounds bad He said take it back to the dealership. I called the dealership and he said it sounded real bad and he didn't want me to drive it and get stuck anywhere. He proceeded to give me the number to roadside assistance and told me to have it towed into the service department. Sad sad, sounds like a rod bearing from talking to them.
Click to expand...


it doesnt sound like a motor problem to me (judging by two blown crank bearings in previous cars).. it sounds more like somethings loose like a rattle. my fathers navigator had the same sound and they replaced the heat shield under the exhaust and it was fine. Try checking that all your stuff is tight underneath exhaustwise before gettin worked up. Def take it to the dealership though.
 

gnat

New Member
Feb 25, 2004
144
0
0
Mar 4, 2004
#11
  • Mar 4, 2004
  • #11
Yeah roadside just picked it up
 

jstreet0204

Active Member
Jun 26, 2003
939
0
36
Winston Salem, NC
Mar 4, 2004
#12
  • Mar 4, 2004
  • #12
I had the exact same sound in mine. sound almost like something metal rattling in the bellhousing. It quit if a revved it up a little. Turned out to be a chunk of the ceramic material loose in the cat and would rattle around until the exhaust built up enough pressure to hold it still. I had a BBK h-pipe for long tubes. I took it off and gutted both cats and the problem was gone.
 

oogtdude

Banned
Jun 9, 2002
1,626
0
0
Mar 4, 2004
#13
  • Mar 4, 2004
  • #13
sounds like clunking in the exhuast somewhere.like above posts mentions.....if thats the engine...THATS gotta be a problem..."cringes"
 

muzztangman

Founding Member
Mar 10, 2002
189
0
0
central cali
Mar 4, 2004
#14
  • Mar 4, 2004
  • #14
sounds like you blew a cat out...
 
M

MustangStallion

Founding Member
Apr 25, 2001
84
0
0
Houston, Tx
Mar 5, 2004
#15
  • Mar 5, 2004
  • #15
this may sound crazy but it sounds like my mustang last year when I thought my engine "bought it". My mechanic said it was my driver side cat. I changed fuel brands and it went away I know, I know..i'm just telling you what fixed mine when it sounded like that good luck
 

gnat

New Member
Feb 25, 2004
144
0
0
Mar 5, 2004
#16
  • Mar 5, 2004
  • #16
thanks guys, i'm going to let them figure it out, hopefully i'll no something early today. I'll be more than happy if its something simple.
 
C

Cobra_Jet

New Member
Jan 27, 2004
1
0
0
Mar 5, 2004
#17
  • Mar 5, 2004
  • #17
Our SHO sounded like that for awhile till it warmed up. The catalytic converter broke up internally.
 

Venom4.6

Founding Member
Jun 30, 2002
1,356
0
0
Saint Louis, MO
Mar 5, 2004
#18
  • Mar 5, 2004
  • #18
I see you have an aftermarket midpipe. Just a warning, if it ends up being a blown out cat on that x-pipe, they won't do anything except charge you $80 for their time. Warranty doesn't cover that. My advise is to narrow the noise down yourself before you take it in. Put the stock H-pipe back on and see if the noise goes away. If it does, get the X-pipe replaced. Bassani is notorious for having there cats blow out. They are crap.
 

mogs01gt

Founding Member
Jul 22, 2002
3,113
30
119
Ohio
Mar 5, 2004
#19
  • Mar 5, 2004
  • #19
Its the Bassani X pipe. Do a few searches on here and on the Corral and I thought it was suppose to have been fix. I guess they use 'Kiss Me''Kiss Me''Kiss Me''Kiss Me'ty Cats or something.
 

CeSaR333

Founding Member
Jan 31, 2001
691
0
0
Queens, NYC
Mar 5, 2004
#20
  • Mar 5, 2004
  • #20
I had the same sound when i changed my mid pipe, it ended up being a loose O2 sensor rattling around, it wasnt threaded all the way in.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

U
8 Years of Vibration leading to engine knock?
  • UpgradeXP
  • Apr 14, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
469
SN95 V6 Mustang Tech Apr 14, 2025
Noobz347
S
KNOCK WITH CLUTCH OUT
  • Scwhitten
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
250
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
M
Chasing a vibration. Help!
  • Mr Bighead
  • Jun 6, 2023
  • 2005 - 2009 Specific Tech
Replies
0
Views
1K
2005 - 2009 Specific Tech Jun 6, 2023
Mr Bighead
M
G
Resolved URGENT HELP!!
  • Gilroy gonzales
  • Mar 26, 2023
  • SN95 4.6L Mustang Tech
Replies
18
Views
3K
SN95 4.6L Mustang Tech Jun 1, 2023
Gilroy gonzales
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?