• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AMW PCV catch can/separator

  • Thread starter Thread starter blackcloud50
  • Start date Start date Feb 3, 2006
B

blackcloud50

New Member
Mar 30, 2005
388
0
0
Feb 3, 2006
#1
  • Feb 3, 2006
  • #1
Although pretty expensive, anyone have any thoughts or experience with the AMW separator? The only thing I see not the best other than the cost is that you have to unscrew the top to see how much oil is trapped.

http://www.accmachtech.com/pcvcatchcans.htm
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Feb 3, 2006
#2
  • Feb 3, 2006
  • #2
blackcloud50 said:
Although pretty expensive, anyone have any thoughts or experience with the AMW separator? The only thing I see not the best other than the cost is that you have to unscrew the top to see how much oil is trapped.

http://www.accmachtech.com/pcvcatchcans.htm
Click to expand...

This is a familiar subject.

Ideally the inlet line would be tangential to the outer edge of the can. This forces the oil to make contact with can and helps settle the oil out of the incoming air.

For a sight line you just need to tap a hole in the top and bottom of the canister, install a couple of elbow fittings, and a hose between the 2 fittings. The oil level in the canister will always be the same as the level in the tube.

I would like to see the guts of this thing.

For the price I would stick with the Home Depot separators. I picked up one of the larger ones that they stock and it looks pretty decent.

Thanks for posting this, I have not seen these canisters.
jason
 
You must log in or register to reply here.

Similar threads

N
Edelbrock 1405 Setup
  • nathantaylor200
  • Nov 4, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
347
Classic Mustang Specific Tech Nov 5, 2025
nathantaylor200
N
P
Progress Thread New To Me 1988 GT - trying to set up vacuum lines for upper intake question
  • pindude80
  • May 6, 2025
  • Fox 5.0 Mustang Tech
  • 9 10 11
Replies
214
Views
16K
Fox 5.0 Mustang Tech Mar 28, 2026
pindude80
P
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
918
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
467
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?