• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Any chance 65 clutch/brake pedals will work in a 67?

  • Thread starter Thread starter 351stang67
  • Start date Start date Jul 3, 2010
3

351stang67

New Member
Jul 3, 2010
2
0
0
Jul 3, 2010
#1
  • Jul 3, 2010
  • #1
I have come across a complete toploader 4 speed transmission setup out of 65 fastback, complete with EVERYTHING except a clutch, including clutch pedals, linkage, driveshaft yoke and a hurst shifter. I have a 67 coupe with a 351C and C6 automatic that I want to convert to a manual setup.
Will the pedals work in my 67? Or is there any "chance" of them working?
It is such a good deal for the setup, but if I have to turn around and buy pedals and/or linkage because it will not work in my 67, then the deal is not so attractive. If it will work, I will jump on the deal.
What all will work in my 67 from the 65 in regards to this setup?

The whole setup can be had for $600, a good deal ?
 

hipo_p51

Member
Jun 13, 2008
199
2
19
Jul 4, 2010
#2
  • Jul 4, 2010
  • #2
I am going to say no, because the 67/8 firewall and dash are so different from the 65/6. I am sure others will chime in shortly.
 

Max Power

Active Member
Jul 31, 2003
1,774
1
36
St Paul
Jul 5, 2010
#3
  • Jul 5, 2010
  • #3
I believe the 65-66, 67-68, and 69-70 are all unique assemblies that cannot be interchanged.
 

hipo_p51

Member
Jun 13, 2008
199
2
19
Jul 5, 2010
#4
  • Jul 5, 2010
  • #4
You buy the package and sell the 65/6 parts to buy 67 parts. If its really a toploader and needs no work, sounds like an ok deal. I am not an expert on the 67/8 cars, but the shifter should work and you have to have the drive shaft check to make sure the length is good. I since you'll have an extra drive shaft, you will still have all the parts to go back to automatic. my .02 cents. good luck.
 
You must log in or register to reply here.

Similar threads

4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
55
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
So confirming what I need to do to put a '88 CV 302/AOD in my '65 A-code.
  • 1320stang
  • Apr 19, 2023
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
7
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2023
1320stang
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?