• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

any ideas

  • Thread starter Thread starter KAGGRIFF
  • Start date Start date Nov 20, 2008

KAGGRIFF

New Member
Nov 20, 2008
4
0
0
Nov 20, 2008
#1
  • Nov 20, 2008
  • #1
I have a internal engine noise. best why that i can discribe it is a rod knock. problem is the noise goes away after the car is warm. With electronic ears I have pinpointed the noise to be the loadest between cylinder 7 and 8 right about the freeze plug area. any help or ideas would be great.
 

WHT306

Member
Oct 21, 2008
104
0
16
HUNTSVILLE AL
Nov 20, 2008
#2
  • Nov 20, 2008
  • #2
COULD BE A WRIST PIN

I HAD AN 88 TBIRD WITH 5.0 WITH LOTS OF BOLT ONS THAT WOULD KNOCK BUT IT WAS QUIETER THAN A ROD KNOCK

AND WHEN IT GOT WARMED UP IT WENT AWAY

I DROVE THE S*** OUT OF THAT CAR FOR 5 YRS TILL I GOT SOMETHING NEWER
NEVER HAD A PROB. BUT THAT MAY NOT BE YOUR CASE. SOUNDS SIMILAR
 

KAGGRIFF

New Member
Nov 20, 2008
4
0
0
Nov 20, 2008
#3
  • Nov 20, 2008
  • #3
well i also thought it might be a broken skirt. this is a 347 bottom end with forged internals. world windsor sr heads. you are right about the noise not being as load as a rod knock but the same kind of sound to me. just seems to be getting worse and it is frustrating on a motor with less than 6k
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Nov 20, 2008
#4
  • Nov 20, 2008
  • #4
my 82 Capri does that as well but its due to the pistons, when they heat up if goes quiet. Always done that since she was new.
 

KAGGRIFF

New Member
Nov 20, 2008
4
0
0
Nov 21, 2008
#5
  • Nov 21, 2008
  • #5
just have a hard time believing that if it was machined correct that it is piston slap, guess anything is possible
 

WHT306

Member
Oct 21, 2008
104
0
16
HUNTSVILLE AL
Nov 21, 2008
#6
  • Nov 21, 2008
  • #6
KAGGRIFF said:
well i also thought it might be a broken skirt. this is a 347 bottom end with forged internals. world windsor sr heads. you are right about the noise not being as load as a rod knock but the same kind of sound to me. just seems to be getting worse and it is frustrating on a motor with less than 6k
Click to expand...
DO YOUR PISTONS HAVE A FLOATING PIN WITH A SPRING LOCK OR ARE THEY PRESSED IN?
 

KAGGRIFF

New Member
Nov 20, 2008
4
0
0
Nov 21, 2008
#7
  • Nov 21, 2008
  • #7
I really dont know. bought the car with the engine already built. I have a feeling i am just going to have to pull it and look. but with a noise that goes away it is somewhat chasing a ghost.
 
You must log in or register to reply here.

Similar threads

C
Engine Cylinder 5,,7, & 8 run significantly cooler than the other cylinders
  • Crisfixes
  • Sep 27, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
315
Fox 5.0 Mustang Tech Sep 27, 2025
Noobz347
W
1993 LX 5.0 dies after ignition parts replacement
  • Warhorse85
  • Aug 16, 2025
  • Fox 5.0 Mustang Tech
  • 5 6 7
Replies
122
Views
5K
Fox 5.0 Mustang Tech Nov 4, 2025
General karthief
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
895
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
W
  • Locked
Fox Wifes 1993 LX 5.0 dies after replacing ignition parts
  • Warhorse85
  • Aug 16, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
446
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2025
Noobz347
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
608
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?