Any Suggestions??

MikeROD16 · Apr 9, 2008

Well, as some of you know, im able to get something off ebay for free cuz of a friend of mine. well, i recently found out that i dont have a MAF and started questioning it. My friend (previous owner) told me it has speed density cuz its an 87. i was surprised, so now i dont need a MAF. what should i get for $100? or around that much. max $110. i dont wanna push it. If you find anything that can come in handy performance wise, plz tell me. i have a cobra intake getting installed (finishing it up today) 1.7RR which are going to be installed very soon (tomorrow) and a 65mm TB.

skunk21 · Apr 9, 2008

save up and do a mass air conversion. do a search in tech and get some info on it.

It's needed if you ever want to swap in heads or go to a better cam. speed density has a hard time compensating with certian mods, it usually gets really rich and bad idle problems and you have to tune it, which is a little more tricky than a mass air car to tune also. some food for thought.

If not open a college fund .

S&B · Apr 9, 2008

MikeROD16 said:
around that much. max $110. i dont wanna push it. If you find anything that can come in hand

Dont push it

stykthyn · Apr 9, 2008

relax and take it

magnj · Apr 9, 2008

I'm sorry but this whole thing is weird. Your going to let your friend buy you 100$ of hardware why?

25thmustang · Apr 9, 2008

A friend of mine let another guy buy him a watch...

What he wanted a little while later in return was, well I'm sure some can figure it out. Needless to say my friend said no, avoids the kid, yet still has the watch, so it might work for you in the end.

$100, maybe some underdrives or real cheap headers?

stykthyn · Apr 9, 2008

cause the friend is in to Mike's "hardware"

MikeROD16 · Apr 9, 2008

lmao oh god dont start with the gay thing again. i dont wanna be banned lol. but besides that, i think i know what im getting. he said he'll pay for it. and no lie, the reason he wants to pay another $50 is cuz i gave him the shoe box of pokemon cards i had laying in the corner of my closet. Im gonna get myself a comp cam powermax with the lifters in the box for $155

S&B · Apr 9, 2008

STep 1:
Jam a hole in the box

Step 2:

Put your **** in the box

impulse001 · Apr 9, 2008

I love that song!

S&B · Apr 9, 2008

me too, it just seems there is nothing JT cant do

Mustang5L5 · Apr 9, 2008

N/m

stay on topic

stykthyn · Apr 9, 2008

be careful when you put the shaft in, use plenty of lube and dont force it. you might hurt something.

S&B · Apr 9, 2008

Ask if you can see his

MikeROD16 · Apr 9, 2008

yo seriously, stop getting off topic.

Mustang5L5 · Apr 9, 2008

I WILL start using my infraction point system. 5 points and you get a temp ban.

Stay on topic. Enough of the gay stuff

FrankenStang · Apr 9, 2008

MikeROD16 said:
yo seriously, stop getting off topic.

Mike, don't worry. As long as YOU stay on topic, you have nothing to fear. These other guys who can't seem to let go of the gay thing are the ones who are asking for it.

stykthyn · Apr 9, 2008

I was talking about the camshaft. make sure to use plenty of assembly lube when you insert it into the block. go slow and rotate it every so often so you dont knick a lobe.

MikeROD16 · Apr 9, 2008

i know. i helped put my brothers cam in his. but do u think this cam is good with gt40 heads, cobra intake, 65mm TB and 1.7RR

1964-1995 Ford Mustang - Crane Cams Camshaft Part Number: C30363901
MFR#: 363901
Description:
"CRANE CAMS POWERMAX HYDRAULIC LIFTER CAMSHAFT -- Duration: 260Â° Intake/272Â° Exhaust, Valve Lift: .456 Intake/.484 Exhaust, Lobe Separation: 112Â°, RPM Power Range: 1200-4800, Offers Tremendous Power, Torque And RPM Potential, Features Dual Pattern For Balanced Intake/Exhaust Flow, Maximum Low-End, Mid-Range, And Upper RPM Power, With Manufacturer's Limited Warranty"

LaserSVT · Apr 9, 2008

I would look into a 140 speedo for it. If not then subframes would be the next thing. I just installed mine yesterday and holly crap do they make a ginormous improvement
So whens the first date? JK mang that last thread was some funny chit

Any Suggestions??

Member

Active Member

I hate my CT. :(

I want to measure mine. It doesn't look that tall.

New Member

Mustang Master

I want to measure mine. It doesn't look that tall.

Member

I hate my CT. :(

New Member

I hate my CT. :(

That is…until I whipped out my Bissell

I want to measure mine. It doesn't look that tall.

I hate my CT. :(

Member

That is…until I whipped out my Bissell

Now, give me a damn CT!

I want to measure mine. It doesn't look that tall.

Member

Got FB banned again for saying nards

Similar threads

Privacy & Transparency

Privacy & Transparency