Anybody using Tweecer to control 4r70w shifts?

94GTLaserRC has an auto and uses the Tweecer. If I remember correctly it changes line pressures to the tranny through the EEC.

I've made some twEECs to my AODE and got some noticably firmer shifts e.g. chirping 1-2 with ease under heavy throttle. Not sure on how it affects the longevity of the tranny - I'm destined for a built 4R70W w/ 4.10s soon and will use the twEECer to change tranny gearing, shift points etc.

twEECs I've made:
95AODE: UP40 CBAZA strategy

trans_tv_adder_12 16
trans_tv_adder_12_time 0
trans_tv_adder_23 16
trans_tv_adder_23_time 0
trans_tv_adder_34 20
trans_tv_adder_34_time 1

and added the follwing with further improvement:
trans_min_tp_for_torque_mod changed from 240 to 900 to disable
trans_torq_control_min-ECT changed from 160 to 250 to disable

--Setting the tranny to shift firmer--

:Functions:

( entering higher numbers on the Y axis (Y axis=MPH) at each throttle position(X axis=TP) will firm up the shift at that TP) ( these values might differ depending on which gears you have)

trans tv press 1-2= x 0 0 0 0 0 52 400 600 1020
y 5 5 5 5 5 10 17 46 56

trans tv prss 2-3= x 0 0 0 28 52 252 400 600 1020
y -5 -5 -5 -5 0 8 8 27 42