anyone with a vortech and a fox throttle body conversion needed.....

The bracketry on our SN95 units puts the blower closer to the motor than in the foxbodies, that means the tube will be too long by about 2 inches. You can use the tube but you'll have to cut off about 2 inches and you'll have to use a reducer coupling that goes from 3in to 2.75 in or something close to that.

Also the hole where the bypass valve is will put the bypass valve very close to your headers and the vacuum hose will be facing the headers- so you'll have to put an elbow in there to get the bypass valve away from the headers.

Those are some of the things I can recall.

I used a novi discharge tube I hacked off like an inch and a half off the front and used a reducing coupler worked awesome