Anyone with Bassani o/r X & long tubes, come in here please

1994Vib.RedGT · May 12, 2005

ok, I was browsing for a bassani o/r X and some long tubes this morning, and a few websites said that bassani o/r xs REQUIRE bassani LT headers, and no other brand. is this true??? I was wanting to go with some BBK LT headers and the bassani X.

1994Vib.RedGT · May 12, 2005

1994Vib.RedGT · May 12, 2005

bump again :damnit:

5.0_GT_kid · May 12, 2005

I believe you do need the Bassani headers for the X-pipe, but don't take that as gospel.

If you want the BBK LT's, get their X-pipe, not much of a difference in design between BBK and Bassani.

Bassani is a little better quality, not sure about fitment, but it's all about what you want and how much you wanna spend.

S/CBlack95GT · May 12, 2005

5.0_GT_kid said:
Bassani is a little better quality

Bassani's quality is a ton better!! Spend the extra money and get the best. You will not be sorry.

TheRedBlur · May 12, 2005

I've dealt with bassani and bought the LT's.

the off road X is a 2-3/4 diameter on the inlet and a 2-1/2 on the outlet end.
the long tubes are 2-3/4 collector, corvettes do this. the bassani is a slip fit connector and will only fit stock heads. any aftermarket ones wtih raised exhaust ports wont fit. unfortunately, I found this the hard way

1994Vib.RedGT · May 13, 2005

I dont want the Bassani headers though, i am not that rich. I want the BBKs with the bassani X

TheRedBlur · May 13, 2005

I have BBK LT's and Dr. Gas X. had to hacksaw the **** a bit but now it fits and sounds really crazy. like at 4k it sounds very exotic and european. I live in an area that is really rich (Bellevue/Redmond, WA) and there is nothing but M3's 911Turbo's GT-2's/3's, etc. they act like they want to run till I let her stay in gear, then they just chang into the slow lanes. they dont' really know hwo to drive their cars anyways, most of them at least.

I'll try to get a sound clip within a week or so.

1994Vib.RedGT · May 14, 2005

If I cant use other brands besides bassani headers with their x-pipe that sucks! my dreams have been slayed!!!! I was thinking of buying them with my graduation money, and I dont have the extra money for bassani headers. Yea though, redblur I would like to hear your setup.

5.0_GT_kid · May 14, 2005

Just buy the BBK headers and X-pipe, many people have used them and had no problem.

TheRedBlur · May 15, 2005

here is a solution...

buy the mac slip fit headers. ( it sucks arse but like you get 8 primaries and you have to pound in the collector. waht you do is ditch the mac collector which sucks, and buy like a flowmaster, or kooks collector with your diameter primaries and a 2-3/4 outlet. that way you can run the bassani X-pipe, and you will have a more efficient colletor which will scavenge more and make your idle more quiet.

thats the only way that I can think of where you could run it.

Anyone with Bassani o/r X & long tubes, come in here please

1994Vib.RedGT

Member

1994Vib.RedGT

Member

1994Vib.RedGT

Member

5.0_GT_kid

S/CBlack95GT

New Member

TheRedBlur

Active Member

1994Vib.RedGT

Member

TheRedBlur

Active Member

1994Vib.RedGT

Member

5.0_GT_kid

TheRedBlur

Active Member

Similar threads

Anyone with Bassani o/r X & long tubes, come in here please

Member

Member

Member

New Member

Active Member

Member

Active Member

Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency