302 bored over .030
Bottom end:
Keith Black pistons (10.6:1)
X-cam
Induction:
AFR 185's w/61CC (untouched)
TFS track heat upper/lower with 1" spacer (untouched)
70MM BBK TB
76MM Pro-M
C&L CAI
Exhaust:
BBK 1 5/8 LT
BBK 2 1/2 offroad X-Pipe
Custom 2 1/2 catback with welded in Mangnaflow Magnapacks
Fuel & Timing:
24LB Injectors
190LPH fuel pump
Timing set a 16 degrees
Short belt (EDIT)
This is for a buddy of mine and he wanted to know if the numbers that he put down were decent. That is what i remembered from what he told me about his setup.
343 rwhp ~ 5950 RPM
335 lb tq ~ (dont remember)
This is with a 5spd through a Tremec 3550, stock driveshaft, and 3.73s.
Bottom end:
Keith Black pistons (10.6:1)
X-cam
Induction:
AFR 185's w/61CC (untouched)
TFS track heat upper/lower with 1" spacer (untouched)
70MM BBK TB
76MM Pro-M
C&L CAI
Exhaust:
BBK 1 5/8 LT
BBK 2 1/2 offroad X-Pipe
Custom 2 1/2 catback with welded in Mangnaflow Magnapacks
Fuel & Timing:
24LB Injectors
190LPH fuel pump
Timing set a 16 degrees
Short belt (EDIT)
This is for a buddy of mine and he wanted to know if the numbers that he put down were decent. That is what i remembered from what he told me about his setup.
343 rwhp ~ 5950 RPM
335 lb tq ~ (dont remember)
This is with a 5spd through a Tremec 3550, stock driveshaft, and 3.73s.