anyone using a B&M Hammer shifter with a C4? I’ve got the shifter and adapter installed, but the adjusters have to be turned all the way out just to get the swivel to slide into the transmission arm in 1st gear. When I shift into Park to check the adjustment, the linkage doesn’t move in and out of the arm smoothly—it takes a fair amount of force and some sideways pressure. Has anyone run into this or have any suggestions on what I should do?
B&m hammer shifter c4 question
- Thread starter 387lx
- Start date
Blackhawkxx
Advanced Member
- Mar 3, 2023
- 449
- 449
- 73
Did the instructions say which gear to have the trans in when first installing the swivel? It has been many years but it seems to me that I used neutral on my C-4.
The instructions say do the initial install in 1st gear then shift into park to make sure it still slides in and out freely
Blackhawkxx
Advanced Member
- Mar 3, 2023
- 449
- 449
- 73
Doesn’t bother me, I’m just trying to see if that is normal. I don’t want to burn up a fresh rebuilt trans
Similar threads
