Bad brakes

J

jasonr82

New Member

Jul 8, 2005

11

0

1

Oct 18, 2006

#1

• Oct 18, 2006

• #1

I have an 89 GT that i recently rebuilt. the car sat for about 2 years and now that i have it running again the brakes are bad. i noticed that the fluid was low when i went to start the car for the first time so i filled it up. ive bled the lines and replaced the master cylinder but htey still seem to be bad. the pedal will go down half way before it does anything and then it seems like its just the front brakes. any help would be greatly appreciated.

 

88LX

Founding Member

Nov 15, 1999

327

3

29

Chicago, IL

Oct 18, 2006

#2

• Oct 18, 2006

• #2

id try bleeding them again and check for any leaks. anyone else?

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,296

18,002

224

Massachusetts

Oct 18, 2006

#3

• Oct 18, 2006

• #3

Either air in the lines after the bleed or you have a leak.

I'd suspect leak if you put the car away with a full MC and found it empty.

 

J

jasonr82

New Member

Jul 8, 2005

11

0

1

Oct 19, 2006

#4

• Oct 19, 2006

• #4

thanks i havent seen any leaks but i could be wrong. i think i will try bleeding them again. maybe its just been so long since ive driven the car that ive just forgot how bad the brakes sucked before

 

Aryan15

Member

Sep 22, 2003

236

0

17

CA

Oct 20, 2006

#5

• Oct 20, 2006

• #5

I bought a new master cylinder and it turned out being bad. I bought a wagner and it fixed the problem. Anyways, you might want to check the proportioning valve or maybe the rear slaves might be leaking.