Bad news!

O

oosmytoo

Founding Member

Jun 21, 2002

530

0

16

Portland - Oregon

Apr 28, 2006

#1

• Apr 28, 2006

• #1

well last weekend we finished my friends trick flow kit, has been running fine for 3 or 4 days now (maybe 50 miles). so today were driving along, stopped at a light. Then the cars idle began to jump up and down, then stalled, and followed by a quik "snap" (same sound when you snap a bolt off). We got out and took a quik look at things, all appeared to be fine. Checked the oil, still perfectly clear (not metallic at all). So I pulled the dizzy cap off and had him turn it over, and the rotor didnt move!

Once we got it back to my place, I pulled the dizzy out, checked the gear/shear pin. Its seems to be ok. So now im thinkin' its the timing chain? dont have time to tear into it tonight, but i wanna get some of your thoughts. Also, say if the timing chain did break, somehow? would that mess anything else up?

 

69clark

Founding Member

Sep 25, 2002

731

7

18

Ravena, NY

Apr 28, 2006

#2

• Apr 28, 2006

• #2

Could have smacked some pistons. If he's lucky they might not have. That sucks though, let us know what you find out.

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Apr 28, 2006

#3

• Apr 28, 2006

• #3

did you check PTV clearence?

 

94gts

Member

Jul 4, 2004

873

0

16

Carmel, New York

Apr 28, 2006

#4

• Apr 28, 2006

• #4

i thought about that too....but its been running a week

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Apr 28, 2006

#5

• Apr 28, 2006

• #5

also i think it was nate on here who had his 351 running for a while then the cam pin somehow came out and caused some damage

 

YEAHLOH95

Founding Member

Nov 19, 2001

1,249

3

39

EVERETT,PA

Apr 28, 2006

#6

• Apr 28, 2006

• #6

did the oil pump drive break?

 

O

oosmytoo

Founding Member

Jun 21, 2002

530

0

16

Portland - Oregon

Apr 28, 2006

#7

• Apr 28, 2006

• #7

YEAHLOH95 said:

did the oil pump drive break?

Click to expand...

doesnt look like it. i looked down in there seemed to be ok? everything was still intact. probably gonna tear her down later tonight. ill let you guys know what we find.

 

Y

yellow1995Cobra

New Member

Dec 23, 2002

2,959

2

0

Massachusetts

Apr 28, 2006

#8

• Apr 28, 2006

• #8

From my experiences, when the rotor does not move it means the cam gear is ground down to nothing, or the dist gear is ground down. I have had it happen on both end too. You really gotta take a good look at the cam gear with a flashlight to see if there is wear.

DId you happen to use a rollmaster timing chain?

 

O

oosmytoo

Founding Member

Jun 21, 2002

530

0

16

Portland - Oregon

Apr 28, 2006

#9

• Apr 28, 2006

• #9

yellow1995Cobra said:

From my experiences, when the rotor does not move it means the cam gear is ground down to nothing, or the dist gear is ground down. I have had it happen on both end too. You really gotta take a good look at the cam gear with a flashlight to see if there is wear.

DId you happen to use a rollmaster timing chain?

Click to expand...

yup used the rollmaster chain w/ the bronze bushing! figured out what happened, when we put the timing gear on, the bronze bushing was not on there right, and we didnt notice! so it must have wobbled, and it broke the chain! somehow it chewed up the thrust plate pretty bad too. So hopefully it didnt screw anything up in the valvetrain! but tomarrow im gonna get the new parts asap! And VERY CAREFULLY put it back together.

What do you guys think? Do you think everything else is ok?

 

Y

yellow1995Cobra

New Member

Dec 23, 2002

2,959

2

0

Massachusetts

Apr 28, 2006

#10

• Apr 28, 2006

• #10

oosmytoo said:

yup used the rollmaster chain w/ the bronze bushing! figured out what happened, when we put the timing gear on, the bronze bushing was not on there right, and we didnt notice! so it must have wobbled, and it broke the chain! somehow it chewed up the thrust plate pretty bad too. So hopefully it didnt screw anything up in the valvetrain! but tomarrow im gonna get the new parts asap! And VERY CAREFULLY put it back together.

What do you guys think? Do you think everything else is ok?

Click to expand...

I had washer issues as well. Luckily the chain never broke. Instead the cam gear wore down so badly the cam was junk. Apparently the cam was walking back and fourth.

When a timing chain lets go, the pistons are likely to hit the valves which are open at that point. I hope for your sake they didnt.

Good luck, let us know what you find.