• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

BBk lowering springs creaking

  • Thread starter Thread starter dw89lx
  • Start date Start date May 8, 2005

dw89lx

New Member
May 7, 2005
44
0
0
Boston, MA
May 8, 2005
#1
  • May 8, 2005
  • #1
Does anyone know why these springs are constantly creaking and clunking? I just bought an 89 LX and the guy that I bought it from said that the springs are settling. Is this true? I think the springs were installed a few months ago.
The front sway bar is removed, not sure if that is part of my problem.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
May 8, 2005
#2
  • May 8, 2005
  • #2
dw89lx said:
Does anyone know why these springs are constantly creaking and clunking? I just bought an 89 LX and the guy that I bought it from said that the springs are settling. Is this true? I think the springs were installed a few months ago.
The front sway bar is removed, not sure if that is part of my problem.
Click to expand...
You need to describe the creaking and clunking a little better. Isit comming from the front end? the back end?
When does it do it?

Also, replace the front swaybar. It was put there for a reason.
 

aaros

Member
Dec 3, 2004
114
0
17
May 8, 2005
#3
  • May 8, 2005
  • #3
were the isolators replaced? ive heard of people not replaceing them or tossing them and geting all kinds of funky creaking.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
May 8, 2005
#4
  • May 8, 2005
  • #4
aaros said:
were the isolators replaced? ive heard of people not replaceing them or tossing them and geting all kinds of funky creaking.
Click to expand...
Good point.
 

dw89lx

New Member
May 7, 2005
44
0
0
Boston, MA
May 8, 2005
#5
  • May 8, 2005
  • #5
The creaking happens when I take off from being stopped. It's mostly in the left front but I have heard it in both rear springs as well. I'm not sure if the isolators were reused or replaced. I haven't had a chance to look at it yet.
 

Umby

New Member
Mar 30, 2005
129
0
0
Atlanta, GA
May 8, 2005
#6
  • May 8, 2005
  • #6
My car currently has BBK springs and no isolators and it makes ALL KINDS of weird noises... personally, I can't wait to replace them... for the record, the car was that way when I got it!
 

BDAWK2002

New Member
Apr 28, 2005
139
0
0
Old Bridge N.J.
May 8, 2005
#7
  • May 8, 2005
  • #7
My Steeda springs do the same thing but only the right rear.I installed new isolaters when I put them in so its not that.The springs were in for a few months with no problems and the one spring just started poping usually when I pull away from a stop.I have to get underneath and check to make sure the spring didnt shift or something.In the Steeda directions it said that the bottom end of the spring must faced towards the drivers side of the car.Maybe thats it
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
May 8, 2005
#8
  • May 8, 2005
  • #8
just put in Ford racing springs... lowered my car about 1inch and i get no noises
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
May 8, 2005
#9
  • May 8, 2005
  • #9
I got BBK springs with new isolators no squeeks of any sort here.

Make sure you index the springs properly when there installed. There is a little hole in the front control arm where the end of the spring is supposed to sit....Just for a future reference if you ever change them.

Edit: On a side note I replaced my rack bushings with off-set ones. This may be your promblem.
 
You must log in or register to reply here.

Similar threads

Drivetrain Rear end clunk
  • seanmahoney
  • Oct 13, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
402
SN95 4.6L Mustang Tech Oct 13, 2025
nickyb
S
5.0 Rebuild
  • smittys7up
  • Nov 29, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
539
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 20, 2025
Noobz347
Fox BBK X-pipe replacement Cat?
  • TIGGER
  • Aug 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
275
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 26, 2025
AeroCoupe
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
330
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
Progress Thread 93 LX father son project
  • ZAM93LX
  • Oct 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 3, 2025
Scrapla347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?