SN95 Best cam for my setup
- Thread starter Striker33
- Start date
-
Sponsors (?)
Reason I ask is "heavy" SN95, combined with Auto transmission means a car that could really use some low end grunt. An aftermarket stall and 3.73/4.10's can help with this, but OP didn't indicate if he had those.
TFS1 is a good cam, but a common remark with it is that it tends to come alive at higher RPM's. As such, a stick and 3.73's or higher would help the cam get into it's ideal powerrange quicker.
With an AODE car, i'd probably look for a cam that will give you better torque down low, however, would like to understand what the OP is looking for. Street driver, or track car?
TFS1 is a good cam, but a common remark with it is that it tends to come alive at higher RPM's. As such, a stick and 3.73's or higher would help the cam get into it's ideal powerrange quicker.
With an AODE car, i'd probably look for a cam that will give you better torque down low, however, would like to understand what the OP is looking for. Street driver, or track car?
Factory gears for now. Primarily a street cruiser. I am planning on changing to 373 gears.
Yea, ok, let the fun begin
is that like the 'infamous' 3/4 race cam of the 60-70's?
just kidding. Carry on, noth'n to see here.
It's fine, it would work. For a street cruiser with an aode I'd go for something with gobs of low end torque.
A custom cam is an option too
A custom cam is an option too
mikestang63
SN Certified Technician
