• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Brake problems

  • Thread starter Thread starter 1SLO306
  • Start date Start date Sep 11, 2005
1

1SLO306

My 97 GTP owns you ALL!
Mar 31, 2005
904
1
17
Muhlenberg, ky
Sep 11, 2005
#1
  • Sep 11, 2005
  • #1
So i was out friday night cruzin in town and i parked my car. a couple mins lata my friend got in it to drive it and he said the brakes wouldnt work until all the way to the floor but the fronts wouldnt work and the back ones would lock up. i pused the car back and all kinds of fluid was on the pavement. one line was loose and i tightened it back up. my brake light is on now. Do u think they just need to bleed??
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Sep 11, 2005
#2
  • Sep 11, 2005
  • #2
I think you need to find out why a line came loose and make sure there is not a problem there first. You will obviously then need to bleed your brakes and top off your reservoir with fresh fluid. Good Luck.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Sep 13, 2005
#3
  • Sep 13, 2005
  • #3
Yeah inspect both brake lines and make sure they are in good shape then bleed the brakes. Also, check your proportioning valve, as they go bad on the olds FOX body mustangs. I sell those a lot at my work.
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Sep 13, 2005
#4
  • Sep 13, 2005
  • #4
Yup, the light is merely a low fluid indicator. Air was let into the system, so I would bleed the system and then try to diagnose what is going on. Where did the line come undone? at the PV, MC, Caliper, inner fenderwell?
 
1

1SLO306

My 97 GTP owns you ALL!
Mar 31, 2005
904
1
17
Muhlenberg, ky
Sep 14, 2005
#5
  • Sep 14, 2005
  • #5
well i had the problem fixed. i took the brakes completely off and put the back on and bleed the brakes. they worked fine but no its doing the same thing again. but i found whats causing the problem. i recently lower the car 2" and is causing the steel line from the calliper to hit the steel line on the fender well when i turn right. the line on the calliper comes loose. im goin to look at it some more. is thier anyway to relocate the line to the fenderwell higher so they wont hit?? This is on the passenger side. thanks for help!
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
291
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
2000 GT-Front Brakes Not Releasing
  • stormsedge
  • Aug 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
248
1996 - 2004 SN95 Mustang -General/Talk- Aug 7, 2026
Bronco2fan
B
Brakes FOX BRAKES ISSUES
  • PonyGTrider
  • Jan 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
53
Views
3K
Fox 5.0 Mustang Tech Jan 31, 2026
Mustang5L5
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
245
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
270
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?