Cam Q

[/\ Vader /\]

1995 Mustang GT Aode.

Pullies, H-Pipe, Flowmasters, 4.10's

I bought Cobra Intake and GT-40P heads and 70mm TB

Will crane cam 2030 be a good street cam ? I would like a decent idle

Car is daily driver in the spring/summertime.

Thanks, Joe

 

[5.0snake]

Try the Steeda 19....works great with the 94-95 computers

 

[igotyofire]

everyone seems to recommending a custom cam, but the only thing i wonder is do these custom cams that guys like ED i belive at FTI still have the common idle issues and require extensive tunning to rid it?

 

[fiveohh94gt]

i'm running that cam with a ported cobra intake and AFR 165s. i had very little computer problems with it. i would recommend some type of computer tuning though with any cam you pick. idle is almost stock, just enough difference that the trained ear can tell its not compleatly stock. should be a good match to those heads and intake for a mild build-up

 

[/\ Vader /\]

i'm running that cam with a ported cobra intake and AFR 165s. i had very little computer problems with it. i would recommend some type of computer tuning though with any cam you pick. idle is almost stock, just enough difference that the trained ear can tell its not compleatly stock. should be a good match to those heads and intake for a mild build-up

Except of the heads, it sounds like we will have a similar setup. What kind of numbers are you putting down.

 

[for_honor]

...I'm running the FRPP E CAM and below 2000rpm it's rough as hell, but other then that, it liven'd up my car

 

[wytstang]

That's a good cam a lot of people have made good hp/tq with it and very little puter problems.

 

[fiveohh94gt]

i put down 280rwhp and 320ft/lbs, but thats with stock MAF and throttle body. i should be able to get 300rwhp when i change those out

 

[TMC]

Unless you are going to put a converter in your car I would not put a cam in it. Your car will be faster and feel much better with the stock cam while the converter is stock.