• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Engine Cam suggestion? HELP!

  • Thread starter Thread starter zZsKyZz
  • Start date Start date Feb 6, 2013
Z

zZsKyZz

Member
Dec 1, 2005
503
0
17
Feb 6, 2013
#1
  • Feb 6, 2013
  • #1
I am going to be swapping in a 83 351w in to my 94 mustang convertible and need a suggestion for a cam. I would like to purchase an off-the-shelf cam instead of going through the trouble of a custom ground cam.

I will be keeping it as a flat-tappet, so keep that in mine.
NO HYDRAULIC ROLLER CAMS!

Here are the mods that will be going in along with it:
-Edelbrock performer intake upper/lower [Ported/Polished to match heads]
-Stock heads [Ported and polished to match intake]
-Ford racing oil pan
-Underdrive pullies
-75mm throttle body
-4cyl foxbody T5 [Car was originally an AODE. Will be switching to a normal T5 after this one blows up, gears are too short]
-4.10 rear gears [going to probably be lowering these so I don't run out of RPMs]
-68mm turbo [Boost Brothers Kit]
-Custom meth injection
-Magnaflow 2.5" exhaust
-42# Injectors
-255lph fuel pump
-LMAF
-Moates Quarterhorse
-28oz balancer
-28oz flywheel
-King Cobra clutch
-adjustable clutch cable
-Ford racing quadrant
-Removed AC/Smog

Okay, I know the heads are going to limit me, but I'm out of money right now. I'm hoping to make most of the power with the turbo at about 12psi. I'm hoping to reach 5-600rwhp with this setup and low 11's/high 10's.
 

gearheadboy

15 Year Member
Jan 15, 2003
1,425
177
84
Greencastle Pa
Feb 6, 2013
#2
  • Feb 6, 2013
  • #2
You are gonna reach the return lane via 4 wheeler and a rope with a 4 cyl or a V8 T5 behind a Windsor. That low first gear of the 4cyl with a 4:10 is gonna be fun for about a day. You have a really mismatched combo IMO. The only one who should pick that cam should be the cam manufacturer. Call one. Honest.
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,648
214
Acworth, GA
Feb 6, 2013
#3
  • Feb 6, 2013
  • #3
gearheadboy said:
Y The only one who should pick that cam should be the cam manufacturer. Call one. Honest.
Click to expand...

+1. You're going to get much better advice from a cam manufacturer than you are going to get on a forum. Internet advice is free, and you get what you pay for most of the time.

Kurt
 

earleys94gt

Active Member
Aug 31, 2003
1,223
16
49
Ashley, Ohio
Feb 7, 2013
#4
  • Feb 7, 2013
  • #4
+2. You have/will invest all your time and effort on the project, don't skimp on the cam. Research, research, research.
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
889
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
Custom tune?
  • Nostang25
  • Jul 13, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
651
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 17, 2025
FastDriver
C
Dyno day! # guesses?
  • clayton seiders
  • Aug 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
515
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 16, 2025
Scrapla347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?