Can the clutch pedal easily be unbolted from quadrant while in car?

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

May 8, 2011

#1

• May 8, 2011

• #1

I need to install my bullitt pedal pad on my clutch. I got the other 3 pedals on with no mods, but the clutch pedal needs to be modified.

I noticed the pedal is held on the shaft by a nut at the end. Can I easily remove the nut, and slide the pedal arm off? Is it that simple?

I know I need to unhook the clutch safety switch as well.


Does anyone have a pic of the clutch pedal assembly outside the car for a clear view of how it all hooks up?

Thanks

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

May 8, 2011

#2

• May 8, 2011

• #2

Ok, how bout this? Could I just unbolt the pedal from an sn95 and install it on the fox assembly? Would allow the pad To mount up correctly with no trimming

The nut I am talking about is on the top of thenpic

 

84Ttop

They make new pistons every day, so why worry?

5 Year Member

Jul 2, 2009

5,222

3,254

204

South Jersey

May 8, 2011

#3

• May 8, 2011

• #3

not sure if the pedals will interchange, but it really is as simple as unbolting it and disconnecting the cable.

 

trbkrb

Founding Member

Jun 4, 2001

1,976

4

39

Houston, TX

May 9, 2011

#4

• May 9, 2011

• #4

You know Mike, I think you may be onto something! I never thought about swapping the pedals. I would think even if Ford changed the pedals a bit, they would have left the top mounting part the same, the clutch rod and lever, for all fox based cars. Do you have a SN95 pedal assembly? I could try and pull one from my local pick a part and see. Actually, we could just check to see if the quadrant assembly is the same Ford part for Fox and SN95 cars. LMK.

 

Chrome_Rust

Member

Dec 5, 2008

530

1

17

Findlay, Ohio

May 9, 2011

#5

• May 9, 2011

• #5

Fox quad works on the SN95 pedals. I have 2001 pedals in my 93, used the same quad and cable from when I had the fox pedals installed.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,264

17,952

224

Massachusetts

May 9, 2011

#6

• May 9, 2011

• #6

trbkrb said:

You know Mike, I think you may be onto something! I never thought about swapping the pedals. I would think even if Ford changed the pedals a bit, they would have left the top mounting part the same, the clutch rod and lever, for all fox based cars. Do you have a SN95 pedal assembly? I could try and pull one from my local pick a part and see. Actually, we could just check to see if the quadrant assembly is the same Ford part for Fox and SN95 cars. LMK.

Click to expand...

I don't have an assembly now. I only just thought of this last night. Right now, local boneyards are mud pits so i gotta wait a bit before i head over due to going during lunch @ work.

I figure it would be as easy as unbolting that nut, and just sliding the pedal arm off?

If that's the case, i'd rather swap arms. My clutch pedal is the pedal i use the most, so i want to make sure the bullitt pedal stays on there well without cutting or glueing