• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

catalytic convertor question

  • Thread starter Thread starter shaun5091
  • Start date Start date Jul 16, 2006
S

shaun5091

New Member
Jul 16, 2006
1
0
1
Jul 16, 2006
#1
  • Jul 16, 2006
  • #1
Hi all,

I'm new to the site and was hoping someone could help me out with a cat question. I am finally going to bite the bullet and put hi-flo cats on my car. the problem is, they're so damn expensive. I thought somewhere on this site there was a thread about some magnaflow cats that you can buy individually and just splice them into an off-road h-pipe. I was hoping to get some feedback to find out if you passed the emissions test, did you notice a considerable drop in power, noise, throttle response, etc.?

Thanks for any info
 

Adams91LX

Active Member
Dec 9, 2003
689
12
29
Plano, TX
Jul 16, 2006
#2
  • Jul 16, 2006
  • #2
umm... just get the off road h?
-a
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jul 16, 2006
#3
  • Jul 16, 2006
  • #3
By the time you find a set of free flowing cats and...

Have them isntalled and welded
Modify the smog pump tube or install a flex line...

You could have had a set that fit and came with all the pieces necessary. I picked up a Bassani Catted X for like $250 brand new from a guy who'd had it sitting in his garage for a while. Granted, I fell into a lucky star but deals liek that can be found.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 16, 2006
#4
  • Jul 16, 2006
  • #4
Unless you are ultra high HP N/A or running a turbo or other power adder, a good set of high flow cats won't make much difference in power level. The difference is probably less that 2%-5%. The noise level will drop slightly, and low end torque may even increase.
 
You must log in or register to reply here.

Similar threads

A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
6K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Sep 13, 2026
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
4.6 question for those in the know....
  • LILCBRA
  • Aug 30, 2024
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
15
Views
2K
2005 - 2014 S-197 Mustang -General/Talk- Sep 4, 2024
Adieu
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?