• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Centerforce dual friction..opinions?

  • Thread starter Thread starter Tasandmnm
  • Start date Start date Jul 1, 2007
T

Tasandmnm

New Member
Jun 1, 2007
19
0
0
Jul 1, 2007
#1
  • Jul 1, 2007
  • #1
I may pick up a slightly used one, how do you guysa like these? I would be moving from my current King Cobra clutch. How does the CF compare in clutch feel and holding power? Thanks!
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Jul 1, 2007
#2
  • Jul 1, 2007
  • #2
First, i'm not sure if i'd buy a used clutch..... thats like buying used rear end gears!? But as far as your questions go... The Centerforce dual friction clutches are just as strong if not strong then the king cobra clutch(Don't know about the super king cobra though?) but they have a soft pedal feel like the stock clutch. They have like a centrifugal weight system so that its heavy duty but is very streetable. And the clutch is good up to 500hp. Are you getting the pressure plate with it as well? Cause you might want that... its kinda a hand in hand sorta thing! I've researched and called around all over about this clutch cause its the one i already ordered for my car. Its suppose to be a really nice clutch. I don't want to get a foot cramp holding in the clutch at a stop light like you would with the King cobra. People say there feet start to shake? ha
 
T

Tasandmnm

New Member
Jun 1, 2007
19
0
0
Jul 2, 2007
#3
  • Jul 2, 2007
  • #3
ok I gurss a used clutch isnt the best idea then. Ok so if I a. looking at new clutches, hoe does centerforce compare to spec? I have been lookin at the spec flywheels so it would be kinda nice to order it all from one place.
 

fiveonv

New Member
Dec 3, 2005
0
0
0
seymour, tn
Jul 2, 2007
#4
  • Jul 2, 2007
  • #4
i like my centerforce, soft pedal compared to king cobra,
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 2, 2007
#5
  • Jul 2, 2007
  • #5
kc and be done, good clutch!!
 

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
Jul 2, 2007
#6
  • Jul 2, 2007
  • #6
slow95gt said:
kc and be done, good clutch!!
Click to expand...


+1 love mine.
 

Blk91stang

Member
Jan 3, 2003
607
0
16
North Brunswick, NJ
Jul 2, 2007
#7
  • Jul 2, 2007
  • #7
greensvt21 said:
+1 love mine.
Click to expand...

+2. Had a Centerforce Lite Metal setup, now a pro-motion custom. The King Cobra was the best clutch Ive had in my car.

Held up to 405rwhp and the cost is almost half of the dual friction setup.

Unless you plan on pushing the hp that you need the centerforce, save some money and get the King Cobra.
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Jul 2, 2007
#8
  • Jul 2, 2007
  • #8
Blk91stang said:
+2. Had a Centerforce Lite Metal setup, now a pro-motion custom. The King Cobra was the best clutch Ive had in my car.

Held up to 405rwhp and the cost is almost half of the dual friction setup.

Unless you plan on pushing the hp that you need the centerforce, save some money and get the King Cobra.
Click to expand...

Yes you can do that, but its like do you want to build your car the right way or not? I mean your spending all this money on your car, whats a little more gonna matter. Personally, i want a strong clutch, and has a soft pedal so i don't get leg cramps at stop lights. Mine is a 100% street car, so for me its just the right way to go. Although if money is a big issue that you can go the cheaper way, either way they'll work fine. Its just a matter of what you want to sacrific for the money? Personally i'll pony up for the extra comfort, but to each is his own!
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 2, 2007
#9
  • Jul 2, 2007
  • #9
if you get cramps at the stop lights, your name should be alice. believe me that clutch can hold much more than you have, if you put a blower on there, you would probably be getting a new clutch even if you get a centerforce, if you get a df, it will hold, but a king cobra will hold it too.
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Jul 2, 2007
#10
  • Jul 2, 2007
  • #10
slow95gt said:
if you get cramps at the stop lights, your name should be alice. believe me that clutch can hold much more than you have, if you put a blower on there, you would probably be getting a new clutch even if you get a centerforce, if you get a df, it will hold, but a king cobra will hold it too.
Click to expand...

Well they claim it holds up to 500hp. Now whether thats flywheel or rear wheel i dont know. But either way. That clutch will/should hold up with a blower.
 
D

Deleted member 87397

Jul 2, 2007
#11
  • Jul 2, 2007
  • #11
The only way I'd buy a used clutch is if it had 1000 or less miles on it. Otherwise just spend the money on a new one. I don't think you could go wrong with centerforce or KC. They are both quality and can hold a lot of power. Biggest diff is the pedal feel, but even pedal feel on the KC is not that bad.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 2, 2007
#12
  • Jul 2, 2007
  • #12
Had Centerforce and King Cobra...

If you can afford the extra $120 or so, get the Centerforce...softer pedal, and holds much more power than the King Cobra.

King Cobra's are rated for 30% more power than stock and the Dual Friction holds 90% more than stock and is softer as well.

I got the CF Stage II, 60% more holding power and love it.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 2, 2007
#13
  • Jul 2, 2007
  • #13
yeah but get this: the kc holds as much as the stock block will hold, the center force holds more, but when the stock block cracks in half, and you put a dart in there or something, it will probably be making more power than the center force can handle, so save the monies, get the kc and start working on a built aftermarket block.
 

Turkey Sammich

I can't fap normal. I cracked a rib, then my ankle
Jul 12, 2006
0
59
154
Jul 2, 2007
#14
  • Jul 2, 2007
  • #14
I've had both. I started with a CF, when that went bad I bought a KC. I personally liked the KC over the CF. Everyone I talked to about clutches in my area usually go Spec or KC, and got horror storys from prior CF owners.

I would not buy a used clutch. Who knows how it was driven before you receive it. It's a hit or miss.

Good luck
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Jul 3, 2007
#15
  • Jul 3, 2007
  • #15
slow95gt said:
yeah but get this: the kc holds as much as the stock block will hold, the center force holds more, but when the stock block cracks in half, and you put a dart in there or something, it will probably be making more power than the center force can handle, so save the monies, get the kc and start working on a built aftermarket block.
Click to expand...

My neighbor is running a Trick flow setup and Paxton 2000 and is pushing 525 rwhp. As for the clutch he is running, i don't know. His block isn't cracked and its a street car and has been this way for over 3 years. So the Centerforce 500hp is actually under rated for his car!

Once again, its all about pedal feel and hp support. You won't regret buying the Centerforce.
 
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Jul 3, 2007
#16
  • Jul 3, 2007
  • #16
love mine, will get another once mine is finished, btw I bought it used last year and put lots of miles on it. Still in great shape, even today.
 

fiveonv

New Member
Dec 3, 2005
0
0
0
seymour, tn
Jul 3, 2007
#17
  • Jul 3, 2007
  • #17
if you use your car to cruise at car shows like i do you will love the cf.but i probable would get a new one
 
You must log in or register to reply here.

Similar threads

M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
154
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
B
Tire size question 1986 gt hatchback
  • B0udreaux
  • Jan 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
585
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 17, 2026
B0udreaux
B
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
2K
Other Auto Tech Jun 13, 2026
427nostang
4
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
892
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?