• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

clunking noise

  • Thread starter Thread starter Jason_mustang88
  • Start date Start date Apr 25, 2007

Jason_mustang88

New Member
Jul 1, 2004
40
0
0
Surrey, BC, Canada
Apr 25, 2007
#1
  • Apr 25, 2007
  • #1
I thought, I would like to post for my buddy to find the answer what is wrong with it. some of you guys can get answer for my buddy? thanks. BTW, his car is 1990 Ford Mustang LX 5.0 with 5 speed.

He said:

so this has been going on for a few weeks now, at first i thought it was just bumps in the road, but when i push the clutch pedal down, about 2 inches from the floor it makes a little clunking noise...It does this both in gear and neutral, driving/coasting or stopped, both engine on or off.....what do you think, i can think of maybe throw out bearing, or theres a ridge worn into maybe the clutch fork and now that is worn past a little bit of the friction material on the clutch, that its jumping out of the groove because the clutch fork has to move farther now? im pretty sure its not the pedal making any noise, b/c there isnt any side to side play in the pedal.

i took a longer look at it a couple minutes....jacked it up, took off the clutch fork inspection cover, got my dad to step on the clutch, and the noise seems to be comming from infront of the pressure plate, like the clutch disc area, cant really tell...Maybe something is getting caught up on the splines of the input shaft?


View attachment 388329


heres the mystery noise, who knows what it is lol
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Apr 25, 2007
#2
  • Apr 25, 2007
  • #2
You might have a bad T/O bearing. Another thing to consider is the front bearing retainer. Stock ones are aluminum and the bearing wears a groove there. That might be the case also. Clutch forks don't normally go bad, but it could. Another thing to consider is the pivot ball in the bell housing. All these parts can wear out and make noise. You can try greasing things up in there for now.

you can get steel steel bearing retainers at www.danddperformance.com
 
You must log in or register to reply here.

Similar threads

B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
213
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
259
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
2000 GT-Front Brakes Not Releasing
  • stormsedge
  • Aug 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
254
1996 - 2004 SN95 Mustang -General/Talk- Aug 7, 2026
Bronco2fan
B
D
Loud noise(s) from Engine Bay
  • DuluthFoxbody
  • Oct 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
387
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2026
AeroCoupe
Drivetrain Rear end clunk
  • seanmahoney
  • Oct 13, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
527
SN95 4.6L Mustang Tech Oct 13, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?