• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Throwout Bearing Noise?

  • Thread starter Thread starter Mentat
  • Start date Start date Sep 24, 2007

Mentat

Member
Sep 12, 2007
25
7
13
Sugar Land, TX
Sep 24, 2007
#1
  • Sep 24, 2007
  • #1
Hi guys, long time reader, first time poster.

I have a 93 GT 5 speed that has developed a high pitched noise. The noise occurs while the clutch pedal is not depressed, and goes away when engaged.

I don't have access to a lift so I have yet to physically inspect it, but are throwout/pilot bearings a relatively common issue? If so, does the noise I describe fir the profile?

Just trying to get some heads up before I get the car up on a rack.

Thanks!
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
314
281
134
Apache Junction, AZ
Sep 24, 2007
#2
  • Sep 24, 2007
  • #2
Sounds like the throwout bearing to me. Just replaced one in Frankenstang's V-6 '04 ... and although it operates smoother, now it makes that exact same chirping noise that you're describing because the bearing is defective. Grrrrr...
 

Mentat

Member
Sep 12, 2007
25
7
13
Sugar Land, TX
Sep 24, 2007
#3
  • Sep 24, 2007
  • #3
Any idea of how vital it is for me to jump on this and replace it ASAP? Will the sound get progressively worse or will the bearing end up seizing eventually and totally screw me?

I hate to skimp on repairs but I don't have the time or resources to drop a tranny and mess with clutch parts right now, if its something that will last for a while I would probably let it ride.
 

PeteyAce

Member
Jul 2, 2004
346
0
17
Sep 24, 2007
#4
  • Sep 24, 2007
  • #4
if not the throwout bearing, does the noise sound like a chatter? if so your clutch could be chattering which could be caused from a number of problems, oil on the clutch to bad trans or engine mounts. but you wont know til you take it apart keep it posted
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Sep 25, 2007
#5
  • Sep 25, 2007
  • #5
Mine made the excact same noise. Eventually it got worse and changed pitch when the clutch was engaged.

I had the clutch and throwout bearing replaced and no more noise.
 
You must log in or register to reply here.

Similar threads

K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
R
03 Mach 1 (tremec 5 speed) - Clutch/transmission noise help
  • rvrstxyz
  • Jan 21, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
3K
1996 - 2004 SN95 Mustang -General/Talk- Jan 23, 2023
weendoggy
Fox Clutch preload?
  • 1990fox306
  • Jul 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
17
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 24, 2023
mikestang63
I
T-5 NWC Rebuild, noise only in 4th gear above 55mph
  • insanebikerboy
  • Sep 6, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 21, 2022
AeroCoupe
J
Drivetrain M-7003-Z T5Z trans
  • Jcook88blown306
  • Oct 16, 2021
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
3K
Fox 5.0 Mustang Tech Nov 13, 2021
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?