i began installing the complete front and rear cobra brake kit today. the fronts went fine. they were pretty easy. i have a problem with the rears, though. the bigger rear rotors require the calipers be mounted farther from the axle via a wider bracket. the problem is that to get the old bracket off, the hub and abs "gear" need to come off. i pounded on them with a rubber mallet, but the didn't want to come off. how do i get them off? are they even made to come off?
my other problem is that i'm not sure how to remove the abs sensor without damaging it. i removed the bolts, soaked them in penetrating oil, and tryed to pry them off w/a screwdriver, but didn't have any luck. what's the best way to get this out?
please help, i'd like to get back on the road soon!!
my other problem is that i'm not sure how to remove the abs sensor without damaging it. i removed the bolts, soaked them in penetrating oil, and tryed to pry them off w/a screwdriver, but didn't have any luck. what's the best way to get this out?
please help, i'd like to get back on the road soon!!